20 Most Recent Ricoh Aficio CL7300 DT2 Laser Printer - Page 2 Questions & Answers

https://printcopy.info/index.php?mod=erc&brand=Ricoh&model=SP100SU&code=SC545

https://printcopy.info/?mod=erc&brand=Ricoh&model=MP1900&code=551

TD sensor (Vt low) error 2: K

that is software program error. u need to update firmware

https://www.youtube.com/watch?v=RpUDjiaU4yc

I had the same problem, but solved it.You have to connect your printer SP210 to your computer.Search (in Windows) "Smart Organising Monitor Status"Select Printer (new dialog box)Click OK (see the error code SC545)Click on User ToolsPrinter Configuration(Access Code is Admin074)Find Fuser SC Reset under MaintananceClick OkCloseRestart your printerYour problem is solved nowORWithout connecting your printer to Computer (you can do this):Turn on the printerPress C (Red colour centre) button onceEnter 107 (nothing will be shown)Press the Green (Coping) button for 5 secondsSee the Display -->Select Engine MaintenanceSelect OkSelect Fuse SC Reset (press down arrow - at down you will find it)Execute (by Pressing the Down Arrow)DoneRestart your printer.Your problem should be solved....

Check its connected to a network, the DHCP server is probably your router if you have a small or home network. see http://www.fixya.com/support/t25283562-solve_cannot_connect_dhcp_server_101#solution-section

SC 899 is a software error. For example printing from directly from a website. Various printing from websites makes 899 error. Just remove the print queue from the computer and that's it. Make sure you save the file first from the website before you print to avoid same problem.

check user manual

Replace Charge corona end blocks

You need to replace the HDD. It is very simple. Then format it in SP Mode. Reboot. Ready to use.

Software error 3: Undefined An error not controlled by the system occurred (the error does not come under any other SC code

• Toner Collection Unit Lock The toner collection coil rotation sensor did not detect rotation of the coil within 5 s after the drum motor

Polygon Motor Error 1: ON Timeout The polygon mirror motor did not reach its operating speed within 20 s after the polygon motor

https://www.youtube.com/watch?v=HjGvYMMQ2BA

Memory error. The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery

Download pcl driver