Samsung LE32R41BD 32 in. HD-Ready LCD Television - Page 4 - Answered Questions & Fixed issues

If you have soem expertise, and at your own risk, it may be a faulty electrolitic capacitor inside the unit. If a capacitor is bulgling or emitting black/brown gunge from a raised dome, (like a faulty tin of food) this is a likely culprit unless the switch itself is faulty. Doing this yourself with probabaly invalidate any remaining guarantee. With care, the most difficult thing is not to break the plastic surround.

this is called panel seperation and you will need a new LCD panel unless your still under warranty it will run around 800 dollars or more

The only option you have with a standard DirecTV box is using composite or s-video connection to your TV. These are much better options than using the RF tuner input and will give you stereo audio. Please take a few moments to rate my answer. Thanks...

try unplugging for about 5 minutes then try it again

if you will go into the menu and go to closed captioning you will find the tele text there

If it's physically broken then it's not repairable and must be replaced.

It's not even that straightforward though as the 32" LCD screen unit is the single most expensive component in manufacturing your tv and the supply and installation of a new screen will cost as much if not more than the cost of a brand new model.

If you have accidental damage insurance then now is the time to consider making a claim.

Sounds like there was physical damage to the LCD panel. This can only be fixed by replacing the whole LCD panel which will cost you around $600 just for the part. A repair shop will usually charge around $200 for labor. The only alternative is to purchase a new TV which will usually cost about the same price and will come with a one year warranty.

make sure all cables are connected firmly and that your on yhe right input mode on tv ( AV1 or AV2 ) EXT1 or EXT2

Hi my name is Roety,
I can help you with your issue ,
Speakers need an amplifier , check if your speakers have a built in audio amps also make sure you are connected to audio out jacks. (still the speakers either need a built in or stereo amp system)　
　
　
If I have helped you with your issue please click accept.
If you have more questions you can still respond until this post expires,
I will reply asap
Thanks I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

You will have to retune the TV to the incoming signal, if you have tried this & still get "no signal" then you will need to check the incoming aerial connection & if there is a good aerial fitted for the flat.

How do I retune the Samsung LE19R88BD for channel 5 ?

Hello Terri
Let's see if we can get you sorted out.
Make sure that you first of all have an aerial cable plugged into the TV.
Secondly make sure that you have it on a DTV (freeview channel) once you are at this stage press the MENU button on the remote. then go down to CHANNEL then across to Auto store and then follow the on screen messages.

That should be you all sorted out. If not then you may not be getting a strong enough signal from you aerial.

Hope all goes well. Please leave a thumbs up

Cheers
Little Dish Fitter.

Just got through to Samsung support. Turns out the freeview card had frozen and needed a reset. To do this put tv on standby. then press in serries these buttons on the remote: 'info' 'menu' 'mute' 'power' TV will then turn on with a default screen. Press 'arrow down' button untill you reach option 12 'reset' . then push the 'right arrow' and tv will reset and start in plug and play mode and commence a scan when you've set the time. Just retuned mine and its back to normal. Hoorah!!! :-)

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again.

go to menu and look for "autoprogramming" and it will scan all available channels.

You need to use the (what looks like a large sattellite) button to retune your tv.
Some Samsung tv's let you access the button but other models have a "D MENU" button on the remote. Press this button, then scroll down to the icon that looks like a large sattellite. Then scroll across and click on "Auto Store" this will then go through all the available channels

TV
RED + SELECT
TV
0056

press the volume button if it works press SELECT to save if not press TV again then volume repeat this step until the volume works remember to press the SELECT button to save the code.

Cheers

Little Dish Fitter

There would be a battery called CMOS battery, which sould be used to save the settting when switched off, THis battery would be dried so the settings cant be saved, call Please get CR2032 Battrey and change it, it would solve your problem

ENJOY RATE THIS SOUUTION
RNJ VINOD KUMAR

on your sky remote

services
4
0 1 select
4
make sure the rf is set to on
Remember the channel rf number,

go to your television the link is to.
go to menu then setup and then manual tune
select the channel you want to view sky on. normally channel 6 on your analogue
then go to Channel type in whatever the rf setting was on your main sky box then press save.

that is your telly sorted out. if you have a magic eye connected at the link end you should see a red led light lit up.
if not remove the magic eye and connect it straight into the back of your sky box RF2
just to make sure that the eye is not at fault.

hope this helps
ill check in a day or two to see if you need more help.

Cheers

Little Dish Fitter