Samsung LE32R41BD 32 in. HD-Ready LCD Television - Answered Questions & Fixed issues
SAMSUNG LE32R41BD
We were watching tthe TV and
Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
7/18/2017 1:39:05 PM •
Samsung...
•
Answered
on Jul 18, 2017
•
77 views
No signal onthe screen
If you are connected to a high definition cable box or satellite tv box you would not need to turn to channel 3 on your television. The television would need to be in the right input either component or hdmi. If someone connected the tv to the cable box or satellite tv box with a coax cable like an antenna cable then the tv channels will be available on channel 3 as well but they will not display in high definition. You change channels with the cable box/satellite tv box remote control. If the above is not correct and you are only connected to an antenna cable and not to a cable box or satellite tv box you will need to complete a channel search from the tv menu. It sounds like you are using a cable box/satellite tv box and that the tv is on the wrong input. If the cable box/satellite tv box is not working (i.e. just a black screen) on your television than that is a different matter entirely.
12/3/2016 2:13:29 AM •
Samsung...
•
Answered
on Dec 03, 2016
•
417 views
Samsung 32 hdtv has sound but no picher
Back - light problem. Check and replace damaged component/s at its
back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
11/4/2014 1:56:36 PM •
Samsung...
•
Answered
on Nov 04, 2014
•
49 views
Hdmi not working
Try turning on the HDMI source first. Then switch to it on the tv. Are you running through a sound bar? If you have a sound bar, then it needs to be turned on first.
5/3/2014 3:17:11 PM •
Samsung...
•
Answered
on May 03, 2014
•
59 views
Can't Change Country Setting
What is the system of transmission to German transmissions? Is it PAL? If so, you can set its country code option, by entering its service mode option. In this option, you will get a section to change its country option. If the Samsung model TV of yours' have facility to receive German transmission, check this mode. For more information go to
http://electronicshelponline.blogspot.com/
12/19/2013 12:45:31 PM •
Samsung...
•
Answered
on Dec 19, 2013
•
157 views
Power but no picture
you need to check weather the power supply has complete output dc voltages 5v stand by, 5v detect 12v-16v for audio and tuner and 24v for back light. if just only an stand by voltage, the cause is either the power supply failed or the main board detect an error in the inverter board .
7/27/2012 7:26:47 AM •
Samsung...
•
Answered
on Jul 27, 2012
•
179 views
Samsung LN46B650 tv is darker on one side
LCD sets use a pair of boards (sometimes combined into one board) to drive the display panel on left and then on right side.Names vary but are fairly easy to research with the model number and Google.Names like sustain, T-con, inverter etc.
4/29/2012 6:27:34 PM •
Samsung...
•
Answered
on Apr 29, 2012
•
75 views
Samsung tv LN40B530p7fxza sound Volume stuck on Max.
As a repair man I always hated that--had to disconnect the speakers and use a scope.Most likely reason is the volume up control---a micro switch beneath the manual button on the set is bad.These are momentary switches--only supposed to work when touched/pushed---they will feel good but have failed and are making contact all the time instead of just when pushed.Only way to prove or disprove this is get at the keyboard and in your case locate (they can with set off be checked for resistance--should be no reading) is locate that volume up switch and unsolder it.If problem is gone (your ears feel better) you have two choices : live with the switch removed and operate for that function with the remote.Usually they only sell the complete circuit board with all the buttons for a set.I would if could control volume just live with it gone.Let me know if questions.
4/4/2012 4:19:36 AM •
Samsung...
•
Answered
on Apr 04, 2012
•
619 views
Samsung tv ln40b530p7fxza
Have the remote checked--it can be tested to see if it is the problem--if remote is good but does not work on set the remote receiver may be bad inside the TV.Most shops and some electronic places have a remote tester--point remote at it and press the buttons and if working a light reacts---some digital cameras will also if on react on the little screen they have if this is done.Either the remote or the receiver in the set is most common.
4/3/2012 2:25:37 PM •
Samsung...
•
Answered
on Apr 03, 2012
•
227 views
Lf on bottom &vice versa.
Either a bad board is causing this or what you should try is to call the Mfr. to see if this is a common issue on this model and to ask if there is a software up grade for this model available ......
3/24/2012 3:05:00 PM •
Samsung...
•
Answered
on Mar 24, 2012
•
29 views
Not finding what you are looking for?