20 Most Recent SanDisk Sansa e200 MP3 Player - Page 7 Questions & Answers

take out the batery

It probably would cost more to repair your 2GB player than it would cost to replace it.

Follow this link:
http://apac.sandisk.com/Retail/Default.aspx?CatID=1400

And select your language. Your manual will come up.

Hope this helps ^^. Please dont forget to rate, Thanks

leave it until the battery compleatly dies then restart it

ITS A S/W PROB update s/w version of ur i pod

You can find the e200 manuals here:

http://kb.sandisk.com/app/answers/detail/a_id/4487#e200

Note that there are two different manuals; one for the v1 model, and another for the v2 model. You can determine which version you have by going to the Settings menu on your Sansa, then "Info". If the number of the firmware version in the top line starts with an "01", it's a v1 model. If it starrts with an "03", it's a v2 model.

There's no way of directly deleting a song on the player. You need to do it either via Windows Explorer, or a music manager program which "syncs" to your player.

To delete a song via Windows Explorer, connect your Sansa to your PC, open up "My Computer" (or "Computer" if you're running Vista), and you should see your Sansa listed there. Double-click on it. If you then see "Internal Memory", double-click on that. You should then see a list of folders including "Music". Double-click on that, and you should see a list of songs. If you see a list of folders named after your Artists, double-click on the appropriate Artist folders to find the songs you want to delete. Select the song(s) and press "delete" on your keyboard.

If you use a music manager program such as Windows Media Player, Media Monkey or Winamp to sync music onto your Sansa, just delete the song from the music manager library or playlist(s) you're syncing to your Sansa, then do another sync.

See this guys tip posted here -->Sansa Mp3 player frozen? How to reset and...It is the best, I can't tell you any better than this.

If your charger/adapter is very light or has an AC voltage range of 100-240 V, it is of a type (switched mode) that is generally intelligent enough to prevent overcharging. The battery set is normally comprised of more than one cell; typically three, and if one of these fails (not uncommon), the device they power will often no longer turn on.

Select FM Radio from the main menu. Then use the left- and right-keys to tune to the desired station. You can adjust the volume by turning the wheel.

Use the Sansa Media Converter. If you don't have the SMC, you can download it from http://www.megaupload.com/?d=3IPZO6Q0

Use the Sansa Media Converter. If you don't have the SMC, you can download it from http://www.megaupload.com/?d=3IPZO6Q0

Use the Sansa Media Converter. If you don't have the SMC, you can download it from http://www.megaupload.com/?d=3IPZO6Q0

Get the Sansa Media Converter from http://www.megaupload.com/?d=3IPZO6Q0

Try here: http://www.megaupload.com/?d=3IPZO6Q0

Load main image failed, this is a firmware error, (this does not have software like a computer)

Recovery mode, the player tried to recover from the error.

The player has firmware updates that where put out by the MFG because of problems.

You have to read the manual, carefully and follow it to the T.
because you need to update the firmware on the player.

This is there website.


http://kb.sandisk.com/app/home

From main menu, select Settings (4 bars picture), find out FM..., you go up ONE (this is language), and select it, you can go up or down to select English.
Good luck

Send it back beacuse their is no syncing method to be seen with in the computer.

it has to do with the headphone jack... don't know how you can solve that though..I suppose the easiest is to send it back

Hi there.

I can understand your issue. When you say "enter USB2.0 MSD mode"getting into recovery mode. Then i'd say firmware needs to be updated..

Please follow the steps..

There are files in the player that might be corrupted causing the device to freeze and stop responding.

SOLUTION 1 - Reset the device.

1. Press and hold the Power/Menu button for approximately 20 seconds.
2. Release the Power/Menu button.
3. Press the Power/Menu button again to turn on the player.

NOTE: Resetting will turn the player off while it is frozen.

SOLUTION 2 - Force MSC or Recovery mode then update to the latest firmware.

STEP 1 - Force MSC or go to Recovery mode
For e200v1/e200R (Recovery mode only): Connecting in Recovery mode

1. On your Sansa player, press and hold the Power/Menu button for 15 seconds to turn the device completely off.
2. Slide the Hold switch so the orange portion shows.
3. On your PC, double-click My Computer
4. On your Sansa player, press and hold the REC button while connecting it to the PC.
5. Release the REC button when a 16MB-FORMAT drive partition appears under My Computer.

For e200v2 (Force MSC mode only): Enabling MSC mode

1. Turn device OFF.
2. Slide the hold switch to the direction of the headphone jack so an orange color would show putting the device on Hold.
3. Press and hold the ( |<< ) button while connecting the device to the PC.

STEP 2 - Update to the latest firmware manually, as it is described in Method 2 http://kb.sandisk.com/app/answers/detail/a_id/306/kw/e200/r_id/101834.

In case you have any further inquiries, please do not hesitate to contact us!