Siemens SpeedStream Modem (4100) (SS4100) - Answered Questions & Fixed issues

http://www.portforward.com/english/routers/port_forwarding/Siemens/Speedstream-5450/World_of_Warcraft.htm should be close enough to get you started (they don't have pictures for the 4200). Check the link for the downloader too - you'll need those ports forwarded if you want to download upgrades. (And you probably can't get both the desktop and the laptop playing at the same time - a port can only be forwarded to one computer at a time.)

First I would open Internet Options in the Control Panel, click on the Connections tab, click LAN Settings and deselect everything that is checked. If you still can't go to a site, try Google Chrome or any other browser to see if they work. It could also be that you have Limited Connectivity. Click Network and Internet Settings and see if check your status there. To reply, please click the Comment button.

Why not leave the modem and router connected and connect the Laptop to the router by wireless.

For simple setup instructions, go here: https://www.att.com/esupport/article.html#!/smb-internet/KM1189747 For more detailed setup instructions, go here: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0ahUKEwiD9oOZg5DYAhXmy4MKHaaMA2oQFghAMAQ&url=http%3A%2F%2Fwww.finestplanet.com%2Fdownloads%2FSS4100install.pdf&usg=AOvVaw3UU1BKiwxaBLxLLwlwyEnV Actually, you will not find a driver on Siemens driver website because according to Siemens, the 4100 Ethernet model works with any Ethernet equipped PC, regardless of operating system. Just ipconfig in command prompt and you will get the default gateway and you can actually get the config page to configure the same. Good luck.

This router is designed to be connected to your computer . Your drives are also connected to your computer. But you can set up a LAN to access your other computers and/ or drives on a network

plug the computer into the modem testing dhcp if it gets internet the modem is the dhcp server the plug into router by itself disconnected it from modem testing dhcp if gets ip address and no internet it's the dhcp server dhcp can be done by the modem or router. I bridged mode the modem and let the router do dhcp. of course the router must be pppoe for dsl. been years since I had DSL, hope it helps

When you are connecting to it, are you using the lan connection straight into the device? When you do that is it showing as at least connected to the device on the computer? You did not post the operating system but can you check the router address by using the command prompt and using tracert commands to see what it is listed as? If you are using windows 10 have you use the powershell command to reset the winsock? Did you use the 30 30 30 reset method on the device?

You posted your password and username. Anybody can take the details and use your account. Ask Fixya to remove it for your own good. http://www.fixya.com/contact

To answer you, try putting in browser 10.1.1.1 see if you can get to the modem's menu.

you need the cd... id call who ever your providor is

Very vague question. Cannot understand a bit? Question should be in detail.

You may have to reset the modem. Hopefully you have all the details on hand for your broadband account available? That way once the details are in you can set the administrative password to whatever you wish. But write it down & put it somewhere safe. :)

try to surf in safe-mode with networking. when it works, something block you..may be the antivirus have a security firewall or not correctly configured.

Go to http://www.google.com and type "Siemens SpeedStream Modem 4100 manual". It is available in PDF file.

1. Connect your modem with bsnl line.2. Connect modem to your computer/laptop using LAN wire3. Power ON your modem4. Open Internet explorer5. Type 192.168.254.254 in address bar and click on enter button6. enter user name as admin and password also as admin. If it not accepts, then reset your router by pressing reset button available in the bottom in hole. Press for 30 seconds7. after log-in click on ISP Connections.8. Click on advanced settings9. Click on Configure the ATM Virtual Circuit10. Delete the existing entries11. Click on Add a new VC12. Enter VPI=0 to VCI=3513. Select protocol as PPPoE14. Select the PPPoE Configuration as 'with PPPoE Bridge'15. Click next button utill page comes for user name password, enter your login details16. Click on Finish button17. Reboot router.That's it, You are done

Hi,

* You dont need any special drivers to install modem.
* Open up internet explorer, type 192.168.0.1 in the address bar and press enter key.
* Now you should see the configuration page of modem.
* On the left side, click on Advanced button, below that, you will see "connection configuration" option - click on it.

*** If it asks for modem access code anywhere, you can find the code underneath the modem. please type it ***

* Under this page, you have to enter the email address in username field and password, change the connection type to smart keep alive, click on save changes

* Now it may ask you for restart modem. click on restart. within 1 min, you will be connected to internet.

Take care

I don't have any connection
right now i am connecting my nokia 5130 through data cable so how can i connect it....?

Hi It is the connection type of your internet service provider. If your internet depends on user and password then it needs pppoe . for that you need to configure router in pppoe mode but you can also create pppoe connection on your computer so just need to enter user and password of ppoe on computer then you can use internet on that computer. Let me know if you need further assistance.Thanks for using FixYa.

Leave your modem on at all times...also do not plug the power cord into a power strip...also use a data cord less than 10' in length...

make sure your its enabled in your biosduring the boot process you will see on your screeen to press acertain key to enter set up press and hold that key to enter set up using arrow keys navigate to intergrated peripherals press enter look for SiS 10/00 press enter make sure ethernet its enabledpress f10 save to cmos restrart your computer if this fails to fix the problemthe driver for this modem should be on the motherboard disk or the disk provided by you ISP internet service supplieryou will have to open up your network connections click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red x or a yellow exclamation or question mark ! ? you will need to update or install the driver or it could be firewalled or you could click start control panel administration tools computer management device manager look for network adapters + expand Ethernet driver if you see a yellow question exclamation mark or a red X you will need to update/reinstall the driver for the device if you computer came with a motherboard disk the driver could be on it also the drivers might be installed for this device click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driverhttp://download.cnet.com/intel-r-82562v-10/3000-2110_4-99324.htmlhttp://download.cnet.com/intel-r-82562v-10/3000-2110_4-99289.htmlhope this helps you

Hello anp1922,

I haven't used a Siemens SpeedStream Modem for some time now. My son replaced the modem we received from our internet provider when we first subscribed. We now use a NetGear Wireless Router. On the NetGear's, there's usually information that explains how to log in to the router such as a User Name and a Password.

Now on your Siemens SpeedStream Modem, it may not exactly be the same. I can't remember if the Siemens had the same setup and I'm sure you would have checked already by now. My guess is that you probably would need the software that came with the modem in the first place. A lot of times your internet provider, especially if it's DSL, will provide you with the router. I would call them and ask them for assistance. They can usually help you best. If you bought the IP Router yourself, then they won't help you and you're best to call the manufacturer. Hopefully Siemens doesn't ask you to pay for their service. You most likely will speak with someone in India who is in training.

I know I haven't completely answered your question but I am willing to help you out if you desire. GOOD LUCK.