Soyo DYLTO32C 32 in. LCD HDTV - Answered Questions & Fixed issues

what is model of your tv?

Please comment back here to this page and provide the Manufacturer and Model Number of the REMOTE CONTROL and I will endeavour to assist you with the problem.

Thank you.

The shop will cost U like $500 for a refurbish power supply board or they'll repairing it.U can do the basic things like take things aparts and putting it back togher again?Yes,tried websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement ur self,the refurbish power supply board will cost u like 110-120 plug shipping.

Purchase an HDMI cable for excellent quality sound and pictures. I suspect the A/V leads will work if you set the TV to the AV channel that is assigned to the AV sockets otherwise you will get a blue screen and no signals.
Hope that clears your problem.

You need to replace the power supply board.

Thank you

Try another outlet and verify the power light comes on from the TV. If not, check for a blown fuse inside the TV.

You do not have a DLP style set. You have an LCD of which does not have a lamp in it. I advise you to have it looked at by a technician.

Tries this website 1-800-Remotes Factory Original get the exact or very close to the original.

go to bestbuy they have them

Diagram fps277-4f03 burned soyo power TV viore power fsp277-4f03 does not turn on I need a diagram English only on Fixya please. https://www.google.com/search?q=fps+277-4f03 make model (what is is)' and a clear question in English. https://translate.google.ca/ ..

That means there are no more updates for that TV. You might want to get a newer TV.

Go to home setting on remote. Go to audio settings on tv. Adjust sound from there down to suitable level.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electro-medical.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Use the remote to choose the input. You can also use the menu button to find the inputs.

If your country uses the PAL TV system make sure the TV tuner is not set to NTSC.

There is a failed part inside the tv that is keeping it from powering up. You will need to have a repair shop look at it to get an estimate.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

No.

You would have to replace the tuner board or maybe just good reflow If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00