Soyo Onyx DYLTO32D 32 in. LCD HDTV - Answered Questions & Fixed issues

You might try rescanning channels to see if it resets

Hello and good day to you!!!

Maybe The problem of your TV could be in the inverter board or the cold cathode light is busted.

Please Follow this instruction on how to fix that problem:

1. Remove the back cover of your TV.
2. Look for the Inverter board.

Inverter board looks like this:


3. Check the input voltage of the inverter board if have 24vdc.Using multimeter (range on DC)
4. If you have 24vdc,check the output voltage of the inverter board it should have 500vdc.
5. If you don't have 500vdc output on the inverter,replace it.
6. If the you have the output voltage on it,the problem could be the busted cold cathode light (C.C.T).Replace it.

Note: You have all the right to consult another expert and don't pay if I did not solve your problem because my primary intention is to help you to solve it.If you have more questions please consult me.

I hope this solution will be helpful.Thank you and don't forget to rate my answer.

Have you tried your old remote on his tv? If that works then it isn't the remote but the sensor on your television. Just an idea.

The codes are

36754302**

99785634**

Hello, Thanks for using Fixya.com

Hello , We are here to help you.

On the back of the TV you should have a Coaxe input. You take the antenna wire ether purchase a adaptor for it if it does not have Coaxe cable or just plug it in the back of the TV.

1. On that back of the TV you look for a plug in like this:
2. You take the antenna end that should look like this:

3. You plug it into the TV inlet pictured on step 1.

4. Take your remote and make sure you auto program your channel or auto search.

This is a basic instruction how to connect a antenna to your TV. You might need a converter if your antenna input is diffrent from what is pictured above.

Thanks for using Fixya.com, We do hope this information was Very Helpful





Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc. Look for 5vdc, 12vdc, and 24dvc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.

replace the remote receiver inside the tv

I have this tv too. I just bought a remote control with a 'learn' function, (from a pound shop), You use the Tv's remote and copy the button functions onto the new remote, It works great, actually better than origional remote, also functions other equiptment too, sky, freeview, dvd, etc. Try that instead.

i have iptv an we cant get this tv set up on it can you help me please

Then you go by the UL listing code and search online to see what other manufacturers make it.

C-Dog

Diagram fps277-4f03 burned soyo power TV viore power fsp277-4f03 does not turn on I need a diagram English only on Fixya please. https://www.google.com/search?q=fps+277-4f03 make model (what is is)' and a clear question in English. https://translate.google.ca/ ..

That means there are no more updates for that TV. You might want to get a newer TV.

Go to home setting on remote. Go to audio settings on tv. Adjust sound from there down to suitable level.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electro-medical.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Use the remote to choose the input. You can also use the menu button to find the inputs.

If your country uses the PAL TV system make sure the TV tuner is not set to NTSC.

There is a failed part inside the tv that is keeping it from powering up. You will need to have a repair shop look at it to get an estimate.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

No.