20 Most Recent
Soyo Atlas DYLT3212 32 in. HD-Ready LCD Television - Page 4 Questions & Answers
How do I install an antenna on a soya tv?
Do you mean a Sanyo? Ok,is your tv made after 2006? It has to have a high definition tuner,unless you are using a digital converter box.The tv only uses 1 channel when using converter. If not the tv has to be set up on air,not cable and needs to be auto programmed.Need more info about what you have please!
Soyo Flat Screen TV won't turn on. Red light
How many times this standby/power light blinks at one time
switch ON? Count it carefully. These blinks are fault indication, and known
as blinking codes. From the number of
blinks occur at one time switch ON; you can get an idea about the faulty
circuit stage inside the TV. This will
make repair easy.
If you're sound in electronics, and wish to get more details,
check this link.
http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic
/ Flip card, can be selected by the drop-down list, by the top left
of the display window, will make surf easy. You can also do a search, by type in the brand name / model
number / IC used, in the search box at the top right of the display
window. google.com/+GopakumarGopalan
Haw to fix this tv power suply
Fixing power supply problems is a skilled work. It will be not so easy for a newbie; and will be dangerous to him/her too.
If you are not familiar with electronics, do not attempt to
repair. Whether you suffer fatal electrical shock!
Instead, contact any experienced service technician, or the nearest service
center.
Tv on ,no picture
does it have sound? if so look on your remote control for a button labled energy saving. this keeps the picture off but keeps the sound on.the button maybe green.
I have a soyo tv and the codes on the setup sheet do not work
Try a code search method. If the remote have codes for your TV, you will won. It is a time taking procedure. Check it. Here the procedure is.Code SearchIf after trying "Direct Code Entry" your device does not respond, or if your
brand is not listed, try doing a search of the code library for your code by
following these steps.
- Manually turn on the device (TV, VCR, etc.) to be controlled.
- Press and hold the SETUP button until the red indicator stays on, then
release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator
blinks once, then stays on.
- Press the CHANNEL UP button repeatedly (up to 300 times) until the device to
be controlled changes channel. The red indicator blinks, then stays lit.
- Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes
under CBL, etc. If you want to store a VCR code under CBL, etc., first follow
the procedure for Direct Code Entry and press CBL in step 2 of Direct Code
Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the
steps above for Code Search. IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE
- Press and hold the SETUP until the LED indicator lights steadily. Release
Setup button.
- Press the mode button that matches the equipment you want to identify. The
LED blinks once.
- Press and release SETUP. The LED blinks once.
- To find the first digit, press each number button from 0 to 9 until the LED
blinks. The number you pressed is the first digit of the code.
- Press each number button from 0 to 9 again as above to find the second
digit.
- Press each number button from 0 to 9 again as above to find the third digit.
- Press each number button in turn to find the fourth digit. When the fourth
digit has been found, the LED goes out
I need a 2007 remote control for a 42inchflat screen LCD HDTV Soyo
For more details type in this site name "Electro-help"
either to Google or Yahoo search box [not
in the address bar of your browser], and click search or press
Enter. It is an electronic equipments
service help site.
Note the
position of hyphen in between words in site name. The site will appear as it is in
web; subtitled as Service help to electronic home entertainment equipments.
Pull up older posts.
You can locate this site
name, either at the bottom part of first search page, or at the top of second
page.
Detailed
descriptions are there to help you.
Sometimes,
clicking on advertisements by the side and bottom of each post might help you
to get details about the availability of spare parts; price and more.
The turn on button in
If you had to play with the cord to switch the system ON, then most likely the problem is with the cord or somewhere near the place where the cord is connected on the board.
As for the switch, when you switch it ON does feel like before or is there a change. if there is a change then it could be the switch.
Not finding what you are looking for?