20 Most Recent Soyo DYLT032C 32 in. LCD Television - Page 4 Questions & Answers

www.alibaba.com/ Try this link.

does it do this on all inputs

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Flip card, can be selected by the drop-down list, by the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window. google.com/+GopakumarGopalan

0028,0026,0021,0029. Check these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Fixing power supply problems is a skilled work. It will be not so easy for a newbie; and will be dangerous to him/her too. If you are not familiar with electronics, do not attempt to repair. Whether you suffer fatal electrical shock! Instead, contact any experienced service technician, or the nearest service center.

does it have sound? if so look on your remote control for a button labled energy saving. this keeps the picture off but keeps the sound on.the button maybe green.

Try a code search method. If the remote have codes for your TV, you will won. It is a time taking procedure. Check it. Here the procedure is.Code SearchIf after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
5. Press and release MUTE to install the code. The indicator light goes off.

Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search. IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE

1. Press and hold the SETUP until the LED indicator lights steadily. Release Setup button.
2. Press the mode button that matches the equipment you want to identify. The LED blinks once.
3. Press and release SETUP. The LED blinks once.
4. To find the first digit, press each number button from 0 to 9 until the LED blinks. The number you pressed is the first digit of the code.
5. Press each number button from 0 to 9 again as above to find the second digit.
6. Press each number button from 0 to 9 again as above to find the third digit.
7. Press each number button in turn to find the fourth digit. When the fourth digit has been found, the LED goes out

Please follow guidelines given in operation manuals of both.

For more details type in this site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search or press Enter. It is an electronic equipments service help site.

Note the position of hyphen in between words in site name. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.

Pull up older posts.

You can locate this site name, either at the bottom part of first search page, or at the top of second page.

Detailed descriptions are there to help you. Sometimes, clicking on advertisements by the side and bottom of each post might help you to get details about the availability of spare parts; price and more.

If you had to play with the cord to switch the system ON, then most likely the problem is with the cord or somewhere near the place where the cord is connected on the board.
As for the switch, when you switch it ON does feel like before or is there a change. if there is a change then it could be the switch.

Hello :) how are you? i have this daytek EPT-4202AN plasma that seems to start when i click power botton but the screen doesn't show any images it stays a full black screen?? please if anyone can help me?? I really don't know what to do
pleeeease? H.E.L.P !!!!

This TV is not Wall Mountable as the Control Box protrudes and is therefore not suitable for a VESA Wall Mount.