20 Most Recent Toshiba 46HM95 46" HDTV - Page 3 Questions & Answers

Ur LCD inverter board it dead,must change to get picture back.

Make sure when you go into your setup menu for channels setup you select the correct antenna input, One will be cable/Analog or Digital select digital attenna input, and connect you antenna to the digital tuner input on the back of the set. Do a channel scan and you should pick up all local channels the digital ones will be for instance channel 8, normal and channel 8.1 would indicated a HD channel 8 or digital channel 8..

Blow dust out of the fan to see if it still work. If not replace the fan.

Replace the lamp first. If that does not fix it then you will have to send the light engine to Toshiba to be rebuilt. The ballast is bad but is not available any more.

Howdy,
With red light blinking either the lamp door is not closed properly or you have a bad lamp.

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up)
Please Note: If you can not rate this post with the highest rating, then please do not leave any rating. I am doing this for free and I do not think that any rating other that the best is needed.
If you need further assistance please comment to this post and I will try to help you further.

Good Luck, Big Irish.

Color Wheel- Call Encompass Parts for part number and Price 1-800-638-3328 once you have part number for color wheel if its to high CK for cheaper ones on E-Bay sometimes you will find better deal thier.

A humming sound is usually a color wheel symptom. I'd recommend you get it diagnosed. Most probably you will need to replace it.

it might be to coll the in side of the tv don't unplug it yu might be damaging it

You need to put it in the cable mode. It is in the menu where you auto program the set.

The bearing in your color wheel motor is bad.

This seems to be an issue with your Digital Video Board, whne you have a Green image on the screen, the bulb is not involved, but there's no need to reutn the bulb, since eventually you're going to need one

David,

Based on your statement, I can see that the problem is your projection TV has a bad convergence IC. You need to have the right tool to change the convergence IC. Or you may contact an experienced tech to replace it for you. Convergence IC would only costs you $7. Please check the link below to see how it looks like:

http://www.shopjimmy.com/catalogsearch/result/?q=convergence+IC

Have a great day!

Is it ok when you watch regular TV thru the cable or sat?

Try replaceing the lamp

I would try replacing the lamp.

You probly have a bad color wheel.

Hi

Thanks for using FixYa. Please check if some wire or a component is touching the fan blades. Also make sure that the fan is firmly connected with the cabinet. Also check this video to verify if you have connected the bulb as described--

Toshiba 46HM95 bulb replacement

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

your lamp is out, if you buy one it comes with instructions on how to change it, it will take about 3 nin's

Ebay carries this lamp for about $160. Tech prices are falling fast, you can get a similar sized lcd or plasma for around $900 brand new at sams or costco.