20 Most Recent Insignia LCDTV26 26 in. Television - Page 8 Questions & Answers

What box are u taking about?The DTV free air signal converter box?No,ur tv is a LCD tv right?Just have a good antena like a roof or a digital antena.Or u talking the paying subcribing Cables companies boxes,Satalites Dish companies boxes,or the Telecom companies like Verizon,AT&T boxes.

Try going into the Audio Settings and set the digital audio to PCM.

If the movie you are trying to watch is the only movie this happens with, try pressing the audio button on the DVD remote to change the audio stream.

You should also set yout DVD players audio output to PCM as well.

Hope this helps!

Hi,
Please adjust zoom/ screen aspect ratio in tv Menu to get full screen view.
Hope this info will help you.
Thanks.

Parts for Insignia TVs can be ordered by visiting BestBuy.partsearch.com or calling 1-888-237-8289.

Reset the tv,by unplug,replug it about an hour later.Go to the tv menu,go to Audio go down to reset it will be back to factory setting,the audio should return to normal.Not,than ur Tuner board have problems.

number of issues could be the cause.

1. back light
2. inverter
3. powerboard

I cannot tell you 100 percent what it is without looking at the unit but i hope those give you a idea what it could be now I have seen where bad capacitors on the power supply board have been a issue in this model before. Please rate accordenly and leave feedback, questions Thanks Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

no sound on my ns-20lcd

Hi,

You can download the complete instruction manual in PDF format by clicking this link.

For additional information, features and specifications, click here

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

You can find remote control codes at InsigniaProducts.com.

Generally, problems like this require repairs to resolve. You may carry the TV in to the place of purchase to pursue service options.

Many remote control codes can be found at InsigniaProducts.com.

Your TV stand may require screws to secure it properly. Unfortunately, the owner's manual is unclear about this, so I recommend contacting Insignia Product Support at 1-877-467-4289 for further assistance.

Try the following: reset the TV to factory defaults. Power-cycle the unit (turn it off and unplug for several minutes). If the TV display doesn't improve as a result, repairs will likely be required. Service can be obtained by carrying your TV in to the place of purchase.

Horizontal lines like you describe can be caused by interference from another device. Ensure that you don't have other electronic equipment near the TV. It can also be indicative of trouble with the display itself for which repairs might be required. If needed, service can be obtained by carrying the unit in to the place of purchase.

If a problem like this should develop within the retailer's return period, it is recommended that the TV be returned for an exchange.

You can find many universal remote control codes at InsigniaProducts.com, just search for your TV model number and click on the Support Tab.

if you check with multimeter, you know all worked fine, you need code programing of the tv, this code is for reconfiguring your tv, search by model, by device and brand, oh you need the remote control original, for solve this problem...

because the problem is programing electronic, the tv have a cpu and have a program, who can solve is expert electronic....

The most common problem in these types of sets is capacitors in the power supply fail.

One of the reasons for this is they cut corners using poor quality parts there; this set like all sets has what is called a standby power supply--it is up and running 7-24 even if the set is not turned on.

What I have seen before is with a power outage when the power returns the caps which were already poor get popped.

They are fairly easy to locate--you follow the power cord inside the set to the power supply board. I will post a photo in a few minutes so you know what one looks like-----any that are gone will be able to be seen--the tops are silver and must be PERFECTLY FLAT--puffed up ones mean they are gone.

I have fixed this kind of problem in many sets and also some computer towers that do the same thing.

Total parts cost should be under 25 dollars and each part only has two leads (one is a + and the other a - side of each cap). Usually there are anywhere from 2 to 5 bad caps.

Considering this is a 26 set---repair in a shop even if it is the caps may not be economical.

Let me know if you get the photo and please ask me if you have any questions----I am here to help.

SD TECH

Go to menu then sound/audio Look to if you have Internal OFF and External on.

the pic attached is an electrolytic capacitor, they come in different sizes and are usually blue, black and sometimes yellow. depending on manufacture.

most of the problems I have heard of tvs having problems with the electrolytic capacitors going bad. if you open the tv and see one of those swollen or leaking you need to replace them.