20 Most Recent Konica Minolta PRINTING - Bizhub-250 Minolta 25ppm Printer/Copier/Scanner/Fa - Page 5 Questions & Answers

Check the print head (s) for that that/those colors

Enter service mode -counter- parts couner-new release-select fuser-open front door-press start button. Exit technical mode. Good luck

try to install the driver again & be sure that is compatible with windows version

explain shaking???

Config Mode is depress 2 and 6 and power on. Diagnostic Mode is depress 3 and 6 power on. This is a Lexmark machine with a Konica Minolta logo

The fuser (The Hot Part) and the machine are not from the same region. For example: North America and Africa. Check where the machine is from and fuser came from. Try this once if it does not work contact a KMBS Technician: 1. Turn OFF the main power switch. 2. Turn main power switch ON while pressing the Reset key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and it has been reset. 5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly. If you do this to often you might cause a fire that will ruin a perfectly good day/ weekend!!!!!!!!!

clean thermostat

model number would help Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

if u installed ADF on Ur machine then check the ADF feeders if not .. then check scanner Assembly

• Suction fan motor malfunction - The fan lock signal remains HIGH for a predetermined continuous period of time while the motor

• Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature within 30 sec.

P-21: Color Regist Test Pattern Failure; Secondary Transfer Atvc Failure; P-22: Color Regist Adjust Failure

• 1.Failed Overall Control Board (OACB). 2.A communication issue between the CCD and OACB

• bizhub 6000 series machines record the DrumUnit's rotation speed. If you swapped drum unit

Go to service mode and clear the counter Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Press menu utility counter display keypad stop 0 0 stop 0 1 input password 9272927292729272 Press end press stop 0 clear then reset administration password

https://youtu.be/N4KwPUPuF7Q power off the machine pressed stop key then on machine error automatically clear error related low power

Self Help Product Support Konica Minolta Business Solutions Inc try this Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Scaner white alignment problem remove scanner glass and clean white tape