20 Most Recent Konica Minolta PRINTING - Bizhub-250 Minolta 25ppm Printer/Copier/Scanner/Fa - Page 2 Questions & Answers


Code C3101

Description : Fusing Pressure Roller pressure/retraction failure.
-
No change is observed in the encoder sensor pulse even after the lapse of 0.5 sec. after the Fusing Pressure/Retraction Motor has started turning for a sequence of the Fusing Pressure Roller's retracting motion.
- No change is observed in the encoder sensor pulse even after the lapse of 0.5 sec. after the Fusing Pressure/Retraction Motor has started turning for a sequence of the Fusing Pressure Roller's pressing motion.
- The Fusing Pressure Position Sensor is not activated (pressed position) even when 30 encoder sensor pulses are counted after the Fusing Pressure/Retraction Motor has started turning for a sequence of the Fusing Pressure Roller's pressing motion.

Remedy :
https://www.manualslib.com/manual/828946/Konica-Minolta-Bizhub-C450.html?page=393&term=c3101&selected=3

Konica Minolta... | Answered on Nov 10, 2019


What are you trying to reset?

Konica Minolta... | Answered on Sep 02, 2019


Thread 2704

Abnormality in the black charging unit.
Possible causes:
Black charging unit
HV Unit
Print Control Board

Best guess is that you have a faulty charge unit. Try swapping the units around with another colour and see if the fault code shifts.

Konica Minolta... | Answered on Aug 16, 2019


help me my konico minolta bizhub 184/164 error (C2558)
my mail id - debajitdutta141@gmail.com

Konica Minolta... | Answered on Jun 27, 2019


c0211 = Manual tray rise decent error - check PC14 lift up sensor, M2PC tray 2 vertical transport motor and also the tray 2 control board

Konica Minolta... | Answered on Jun 13, 2019


yellow toner or motor

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jun 06, 2019


Enter service mode -counter- parts couner-new release-select fuser-open front door-press start button. Exit technical mode. Good luck

Konica Minolta... | Answered on May 31, 2019


try to install the driver again & be sure that is compatible with windows version

Konica Minolta... | Answered on May 15, 2019


A4 paper equals 8 1/2 x 11 paper wrong paper setting

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Apr 30, 2019


Config Mode is depress 2 and 6 and power on. Diagnostic Mode is depress 3 and 6 power on. This is a Lexmark machine with a Konica Minolta logo

Konica Minolta... | Answered on Apr 28, 2019


The fuser (The Hot Part) and the machine are not from the same region. For example: North America and Africa. Check where the machine is from and fuser came from.

Try this once if it does not work contact a KMBS Technician:

1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Reset key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.


If you do this to often you might cause a fire that will ruin a perfectly good day/ weekend!!!!!!!!!

Konica Minolta... | Answered on Apr 27, 2019

Not finding what you are looking for?
Office Equipment & Supplies Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

bizhub Konica Minolta

  • bizhub Konica Minolta

Most Popular Question

blurred pictures when scanned

  • Office Equipment & Supplies
Loading...