Konica Minolta bizhub 350 All-In-One Laser Printer - Page 2 - Answered Questions & Fixed issues

no such code for a bizhub 350 what is the model number Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the drum and developer Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code for bh 350 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what model no code for the bh 350 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

When you installed the driver did you check the boxes for the installed options? Plus you may have to check the box for saddle unit. Hope this helps.

Change the marketing area from EU to US in Service mode.

What printer is it ? Some older ones need manual calibration, where patterns are printed, then you tell the system which is the best one. Newer ones can self calibrate, but still need it done. Go into your printers menu and see if you can find something on calibration or allignment.

reset what on the bh 350 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

have tech come out and flash the firmware on the machine THE COPIER OS Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Did you call your service guy and ask them?

LOTS TO CHECK Check if the LAN cable has been correctly connected, if the SMTP server is ready for communication, if the network settings such as sub-net mask setting are correct, or if the E-mail address of the destination is correct. LAN cable has not been connected, or failed to communicate with the SMTP server. You tried to transmit the document to an incorrect destination address. A LAN cable is not connected. Check that the LAN cable is connected correctly. The network of the network multifunction machine and the PC with the IP address of the destination mismatch.Confirm whether the network settings of the PC and the network settings of the network multi-function machine pose a network-type problem.The network settings in the PC have not been set correctly.Check the TCP/IP settings of the PC. The network board of the PC with the IP address of the destination has failed. Replace the network board or the PC. Power is not being supplied to the HUB. Supply power to the HUB. A cross-type network cable is not being used for Peer-to-Peer connection. Use a cross-type cable. The network cable is disconnected. Replace the network cable. Network load in the destination PC is too high. Check whether a mail with large size data is received in the destination PC, or a large file is downloaded from the Web. There is too much transmission data. If the scan resolution is set high, scan fewer pages. The access is limited by the firewall (Windows Firewall) of the network connection in the PC. Consult with the network administrator, and change the firewall (Windows Firewall) settings of the network connection. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc try this Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

YOU DON'T!!! When you replace the the belt with a new one one it will rest automatically Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code for that machine Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NVRAM failure need to get tech to come out reflash copier software or the NVRAM and or board is bad Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc try rthis Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f