20 Most Recent Konica Minolta bizhub 350 All-In-One Laser Printer - Page 7 Questions & Answers


does this code show up on different number or just one, check the phone line is it analog not digital? Is the line connected to line plug not tel plug

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 25, 2016


yes what about it???????????????????????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


service or admin?????????????????????/

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


no such device

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


there is no image transfer belt on a Bizhub 350. there is one on a C350?????????????????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


your top output tray in the middle are four orange rollers when properly cleaned. well the top two and bottom should seperate when paper comes out, there is a problem with that get a tech out to look at it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


Sir/Mam,
On the right side of the machine just below the scanner section (The part with the big glass) is a cover next to where you connect the Ethernet cable. Remove the cover, with the machine on use a small screw driver and gently depress the small black switch. The machine is going to go thru some screens when you see the screen with the copiers on it to the left on the screen in the middle you will see a "." when that is displayed press 3. The code will come back but now press the Utility/Counter button, you should see a button that says Maintenance Mode press that, see Trouble Reset press that and the machine will again will go thru warm up procedure, you will see the "." DO Nothing! The machine should go to "Ready to Copy" if the code comes back. Have a technician look at it DO NOT CONTINUE TO RESET the code is for the Hot Part called the FUSER. It can catch on fire! And that will ruin a perfectly good day!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


mean the toner is not fusing to the paper replace the fuser unit

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


firmware only available to Konica Minolta dealership and KMBS techs via secure web site, Konica Minolta likes to protect their copier software

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


sure of the model ########## and the code ################# could not find in the service manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


do you fave both the mount kit and the fax kit???????????????? recommend a tech as certain things need to be done in order

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


turn off the main power switch rear left side the power back on.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


replace the Scanner CCD

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


finisher issue the output tray there are four orange roller if they are clean!!!!!!!!! that opening between them is causing a issue

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 24, 2016


check there are two locking claw for uper cover of adf one is broken check and replace if necessary

Konica Minolta... | Answered on Jan 23, 2016


1. Press the Utility/Counter key.
2. Touch [Check Detail].
3. Press the following keys in this order.
Stop ? 0 ? 0 ? Stop ? 0 ? 1


Then


1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Administrator # Initialize].
3. Select [Yes] and touch [Enter]. defaults the PW 12345678

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 22, 2016


please recheck the code could not find in the service manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 22, 2016


How do you know it a hard drive problem what code is showing

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 22, 2016

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

1,099 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

carpediemweb

Level 1 Expert

51 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

bizhub Konica Minolta

  • bizhub Konica Minolta

Most Popular Question

c 0001 code konica minolta bizhub c350

  • Office Equipment & Supplies
Loading...