20 Most Recent
Konica Minolta bizhub C250 All-In-One Laser Printer - Page 3 Questions & Answers
Konica minolta di3010 how can i reset drum unit?
You replace the drum and developer. Pior to that you clear counters and run the require procedures after because if you reset your drum unit without replacing it the codes will begin to show up the copier works on the counters when you clear it then the copier thinks the drum is new an set voltages as required since it is not new then you get problems . Replace the drum, cleaning blade and developer and do it right!!!!! Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/normanj_7893313f0751935f
Reset fusing unit bizhub 420
FIRST, if this code comes back. Have a technician look at it DO NOT CONTINUE TO RESET the code!!!! AS this is for the Hot Part called the FUSER. It can catch on fire! And that will ruin a perfectly good day!!!!
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/normanj_7893313f0751935f
Minolta bizhub C250 is "offline" every time it rains/electricity
Does your copier have a good surge protector or is just plugged into the wall and not some 5 and dime surge protector ???? does the surge protector have the network cable protected to???? goods one will protect power fax and network. Why FTP (File Transport Protocol) File sharing Do you scan to one or to your computers and email????
Have a electrician come out place the copier on its own circuit. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/normanj_7893313f0751935f
Not finding what you are looking for?