20 Most Recent Verbatim STORE-N-GO (95312) 8 GB Hard Drive - Page 2 Questions & Answers

you dont want to install your usb??why not why do you have it then???

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question mark?

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts:

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x

right click to reinstall drivers

if your computer came with a motherboard disk the drivers could be on it or it might aotomatically find the drivers itself

hope this helps

Try uninstalling and re-installing the program and see if that works for you.

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark?

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver

click start click on my computer you should see your usb drive

right click then select format

another way is to control panel administrive tools computer management disk management right click on your drive select format

hope this helps

here is a general look at the drivers and how to update them if your computer came with a motherboard disc the drivers could be on it click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver make sure the lead/s that attach to this drive have a secure seating and are not bad/faulty the light on only tells that its getting power it might not be getting enough power you might test the lead/s or just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again, sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable, check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems hope this helps

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers if you can see your usb drive but its not working ports(com&lpt)right click update driver if this fails to fix the problem check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also scroll to disk drives if you can see your drive + to expand right click you should see options update driver disable uninstall scan for hardware changes select properties you should see options in the general tab to troubleshoot policies volumes driver and details under the driver tab you will have the options to check the driver details update driver rollback driver or uninstall hope this helps

You will only be able to use this flash drive if you have the password.
Did you enter the password or is it a factory default password.?

Yes it can be repaired as long as its memory registers are working well.
Make the circuit connection and connect them. It will work well and hope its memory chip is good and working well.

windows NT could not start bcause the following file is missing or corrupt :
\system32\ntoskrnl.exe
you could run the check disk utility click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive then defragment your hard drive or click start control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now,start should schedule this task when restart do not do anything while the chkdsk utility is in progress any input may damage your computer hope this helps

Hi, try going into 'Control Panel' -> 'Administrative Tools' -> 'Computer Management'
Then, under 'Storage', choose 'Disk Management' and try formatting from there. If necessary, give your usb key a drive letter.

My first question is: what platform (PC or MacIntosh) are these two laptops?
Secondly, are both laptops using the same operating system?

Your Verbatim drive should be formatted to be compatible with the operating systems being used.

I certainly wouldn't throw it away... but you might not be able to retrieve the files that are on it.

Try inserting it into one of your laptops. Does it show up? Try the other laptop. Does it show up?
If "yes" on either laptop, try opening it, or clicking on it & trying to get information on it. That will give you some clues.

• If you're running Apple OSX, you can open "Disk Utility" and view it, repair it, or reformat it. It's pretty straight-forward.
  

• If you're running Windows, you can click on "My Computer", then click on "Manage" in the Explorer window. Open the "Device Manager" and click on the "Disk Drives" tab. Do you see it? If so, right-click on it, and then select "Properties". Then click on the "Policies" tab & select "Optimize for Performance", then select "OK". Click on "My Computer", select "FAT32", then "OK".
  

If you did this correctly, you thumb drive should now work on all Windows operating systems.

Plug it in, right click, and select format. Choose quick format. that should fix it.

You are LUCKY that you only have 8GB of data to restore. Very likely, there actually WAS a virus that had transferred to the Verbatim drive. Find and purchase a DATA restoration software from a reputable website like CNET.com IF your data is worth the COST to restore it. These software are in the $60 to $200 range but work VERY WELL. Once you retain your old files, reformat your 8 GB drive to use it FRESH again! Best of luck!

Hi,

If i have understand your request you need to know how to modify your folder options for your macbook,

first I guess you have the OSX in your mac.

if yes , all you have do do is:
right click in your folder

use the third one ( sorry my system is in French)

hear you are
to modify what you want you have to unlock the options ( see the red circle)


you have to put the administrator password


now you can modify what you need.

Hope this can help, and sorry for my English.

I think it could be due to virus activity. Some virus make the contents of the drive hidden, thats why user can't see the files and the space available for use is less than the capacity.
It is suggested that go to FOLDER OPTIONS - and seclect SHOW HIDDEN FILES. It may show the hidden files. Otherwise, if you dont have any vital data on the drive, just format it. Hope this would fix the issue and you would be able to enjoy the full capacity of the disk

Let me know if any further clarification is required. Hope this helps! Dont forget to rate the solution!!
CreativeTECH

All you need to do is plug your drive into your computer, then copy your file from your PC and paste it into your store-n-go drive.... that's it.

Let me know if this helps you at all?

Most warranties are at least 12 months. So, exercise the warranty to get it replaced.

connect it to PC then... go to My Computer icon on desk top >> right click >> manage >> Disk management >> select ur USB Flash Drive/pen drive >> right click >>format ....ok......

This problem is not typical, as there is supposed to be two small plastic tabs that that slide into equally small indentations on the plastic that keep the drive out while in use. Normally the drive would slide out and lock, then, when you're done do push the drive back in. Appears to be defective or broken.

-David.

control panel admistrive tools,computer management,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or ports(com&lpt)right click update driver hope this helps

Hi,

You need to use the command (dos) prompt to format it. The sequence of command would be Click > Start > RUN > type "CMD" > type "CHKDSK" and the letter of the stick and "/F". Ex. chkdsk Q: /F > Enter

Plug your USB Drive into your computer, then go to:Control Panel / Administrative Tools / Computer ManagementThen once in the Computer Management Window look on the left under "Storage" and click the + to expand.Find your USB drive on the list to the right.If you right click the drive on the list, you'll have several options including the option to format it.

Do get back to us for any further query and do not forget to accept it.

Thanks for contacting fixya.com