Thomson GE 2.4 GHZ Corded Base / Cordless Handset Combination Phone With Call Waiting Caller ID and Digital... - Answered Questions & Fixed issues
Power adapter wire too short to reach outlet.
It is tough to find the right power adaptor with the "right" length cord. Your best bet would be to use an electrical extention cord for the added length you need. "if you can't get the adaptor to the outlet....... take the outlet to the adaptor' !!!!
Hi,
I have an older Thomson
1. Unplug the phone from its power source
2. Maintain the Mute and Headset keys pressed
3. Without releasing the Mute and Headset keys, plug back the phone to its power source
4. ST2022 will prompt "Reset to default !!!"
5. The ST2022 is now reset to its default configuration values.
I was cleaning out my
Could be many reasons.
You could check this:
after removing the battery cover check that your connector is well inserted.
Look carefully one of battey cable may be cut or not in contact!
Manual
Go through User Manual or contact customer care.
Power cord
Google the unit number and check the model number on Ebay.
Price the cord and see if it is worth getting!
I have Dect 6.0 cordless
Hello,
Look at the power cord. Verify that it plugged into the phone and the wall outlet.
2
Check the low battery message on the display. If the "In Use" and "Phone" indicators do not light up, you may need to charge the batteries. If you purchased new batteries, make sure you install them correctly.
3
Disconnect the power cord from the base. Remove the batteries from the phone. Wait a few minutes, reinstall the batteries and reconnect the power cord. Look at the display to see if you can read it.Tell the representative that you are having trouble reading your phone's display. The company may repair or replace your phone, depending on your warranty
I hope this will help to solve the problem....
Not finding what you are looking for?