20 Most Recent AEG 24 in. Favorit 50730W Free-standing Dishwasher - Page 9 Questions & Answers

Aeg 8081iM "CE" fault.. Fixed it! :) wax valve looks like it got water in it, blew the controlling triac on the main board and fried a track on the board. Bought a new wax valve, installed it. Got a quote for a new board...too much($600Aud+ I'd buy a new one If I had to pay that)...Found a dead machine which had a blown transormer but good board, so played swapsies with the transformers on the main board. Fixed the source of the leak, switched it on and started washing the dishes! :) Now have a $30 spare parts machine for the experience! :)

check pcb board sounds like its blown something

Broken drive belt?

try to reset program..... hold off button for 2 seconds or so..... until it turns completely off.... it this won't help, try to disconnect it from outlet..... wait few minutes,... connect it back to wall and try again

Sounds like the advance timer un plug and wait a few hours should reset itself, good luck

Drain error?clear blockage from pump/pipe/s-bend spigot>> call a service agent

This error is flood alert because of a leak in the tub. IT might be a seal but you have to remove it and drain it and lay it down to see and then you need parts.

I have a similar issue on oko favorit 50700. I have checked the flow from the inlet hose into a bucket and it really seems ok, so I think maybe a problem at the inlet to the machine? Plea update if you get a fix!

Hi,
Check your heating element..
A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and seehow simple it was. thanks Ronnie " - ronnieshomes