AEG 23 in. 6410KF-N Electric Cooktop - Answered Questions & Fixed issues

E5 or E0 means that the stove is getting overheated. You have to reduce the temperature for it to stop. It goes on with few beeps and then stops.

p1 beep sound

prestige induction cooker showing error p with beep sound problem solution

It is child lock.

Turn cooker on, press two + at front of oven, this will then take it off for that cooking session.

To turn child lock off switch on hob, and touch - for 5 seconds.

Hello mons_sorense - Usually this type of information is not release to someone who is not a technician (or to a consumer) and it is very rare to find enough information to do it yourself. In most cases this information can be found on the internet; however it is not provided directly from the manufacturer. Typically this is something that you want a certified professional to install/remove for you due to safety and liability reasons. They also usually warranty their labor just in case something else may turn out to be the root cause of your initial problem and it does work out better to your advantage. Consider contacting your manufacturer for more details on who in your area can properly repair/install this part. (part usually have a 30 day warranty with tech). I would suggest contacting your manufacturer to provide you a listing of authorized technicians in your area whom may guide you through this process.

Error Code: E3Reason: The voltage is higher (140V-160V)for 3 secondsSource: Induction Cooker Error Codes Explained

Error Code: E3Reason: The voltage is higher for 3 secondsSolution: Check voltageSource: Induction Cooker Error Codes Explained

E7 error code definition: "Internal Electronic Temperature sensor is opening circuit or short circuit"Solution: Contact technical supportSource: Induction Cooker Error Codes Explained

It is possible that there is fault in the circuit as the drive section seems to fault when the current requirement is high. It is also possible that there is a component possible a semiconductor- MOSFET- that has gone weak during the power outage and so fails .
It is best to have it checked now as it might save a larger expense if the whole unit fails. Also someitmes it can be a silly dry soldering which can be done up immediately. So get support if youa are not able to DIY.

Try
mauritron.com

They have the world's largest library of
owners user instructions operating guides
and
technical repair schematics circuits service manuals

I'm not connected to them, just a satisfied user.
Also if you don't find your item in their listing then ask and they will get it for you

e 3 is error because of high voltage may be more than 30 kW at your house......it will not work with it u have to buy a voltage regulator for it........

My hob unlocks with that I turn on the hob and the the L appears, then I hold down the lock button until it disappears then I push the STOP/GO button.

Dear friend,

im sure if you go to the AEG website & type your modle # etc, you would most probably find a downloadable user manual for that. Give it a go.

Cheers
Jim.S.

Sorry to read about your problem, I hope this helps you out.

stop using and call a service company, before further damage occurs.

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

May I get the make and model # so I may help you more

child lock is activated , switch on hob press - and + button simultaneously hob will return to normal. if zeros dont appear try pressing and hold - key slightly before pressing +key hold both for a few secs.

May I get the make and model # so I can help you get the child lock off.

i called up AEG customer service, and they said: Press the '-' and bottom right '+' sign and this should take off the childlock. So it looks like there manual was correct. It seems like in some cases you need to do this, or the method suggested in the other post

I am sure there is one to download but did not found anything with google...
If search engines are no help, just ask some deep web specialists, e.g. http://manualfox.com - this is a manual search agency and if they don´t find it, it does not exist in the Internet.

It is child lock.

Turn cooker on, press two + at front of oven, this will then take it off for that cooking session.

To turn child lock off switch on hob, and touch - for 5 seconds.