Top 20 Plantronics - Bluetooth Headset Plus Base & Headset Questions & Answers

Google <make> <model> manual

in your user manual or in your box that the item came in will be a pass word that is unique to that set so no one can use it

May be obvious, but did you try 0000?

Probably obvious, but have you tried 0000?

http://www.plantronics.com/us/support/kb/ask.jsp#

I'm wondering if the the battery has died in the headset. The battery is not replaceable but you can buy a replacement headset, follow link below.

http://www.headsetsdirect.com/84321-01-510-replacement-headset.html

0000

The standard password on most Plantronics Bluetooth headsets is 4 zeros - 0000

Good Luck from Headsets Direct!

to use the pass code for your blue tooth device you must first put the device into discovery mode then most blue tooth manufactures use a factory 4 digit pin pairing code they are as follows 0000,1234,1111,or 9999. i hope this helps

The generic PIN (Which is what I'm guessing you need) for most bluetooth devices is either 0000, or 1234. Please try those and see if that solves your problem.

most blue tooth manufactures of blue tooth devices use a factory 4 digit pin pairing code now the most common one is as follows but there is a possibility that i could be one of the others i will put them in order from most common to least commmon try them in that order they are 0000,1234,9999,or 1111 i hope this helps

Most passcodes are 0000 (4 zeros)

Dear,
The most bluetooth devices use 0000 (4 x numerical zero) as it's default code.
Sincerly

You could try the bluetooth generic passwords (0000 and 1234), these usually work with most devices.

0000 should do it

This web blog might be of help to you since it's the same type problem:
http://soundingboard.plantronics.com/t5/Enterprise-Wireless-Headsets/CS50-No-dial-tone/m-p/234
You might check and make sure battery and all contacts are clean, they could be slightly oxidized and causing problems...clean them with a qtip and isopropyl alcohol, or a pencil eraser.
Good luck, hope this helps, and thanks for using FixYa.

First, try '0000' (four zeros), which is the most commonly chosen code by bluetooth manufacturers. If it doesn't work, swittch to '1234'. If this one also fails, very few models use '8888',
Hope one of them works for you.
Cheers! Carlos

For most Plantronics products, this passkey is 0000
please Rate me +++++

Refer to this tip:
http://www.fixya.com/support/r5008953-pin_codes_most_bluetooth_headsets

http://www.plantronics.com/media/media_resources/literature/user_guides/explorer_390_ug_en.pdf;jsessionid=6A96FBBA24861D3B48288B1EF01302E7.bravo