Top 20 Akai LCT2060 Television Questions & Answers

Sounds like power regulator board fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ You should be something in electronics to gasp the essence of the posts there.

Fault within the TV. Contact any service technician. Electro help

Try Phone: 401.658.4032

try using a universal remote

try to go to retrevo.com

try to go on www.retrevo.com.Hope it helps..

As far i can tell,u said the tv u unpluging,repluging the tv back awhile later the tv will function and work is that correct?Yes,this problems,alway related to the tv power supply board,that the board where the tv power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.U said u tried programing the remote,is the remote u have and using is a universal remote,u don't have the tv original remote?Yes,try website like Remotes.com to buy the tv original remote too.

Just a possibility, but if you are on satellite signal try unplugging the satellite receiver for 30 seconds and plugging back up. Otherwise check the menu in the sound section to see if your speakers are on. Also you might have the set on mute so check your remote for this. The worse case is your audio amp or the microprocessor inside the set which is usually described as the main board.

The display settings on your computer need to be turned down. Set it to 800x600 and move up from there, if the resolution is too high - the TV won't display it.

If you live in the continental United States I don't think you can use your bunny ears anymore =( they switched everything to digital a while back.

Hi,
Click HERE to download service manual copy as it was promised in chat session.
Thanks.

hi there, good thing you detect it earlier. Heres my tips cut that wire and try to solder it. Or if soldering is not possible rewire it by tie it together and coat with electrical tape for safety. It is possible that you have a cold contact on the supply. Hope this helps. Please rate and vote. Good day

Are you still having problems with this?Please let me know.Thank You very much!

Tyler

HI:
Check the power supply for puffed up capacitors and make sure all voltages from the power supply is good and in nominal range. This is usually an indication of a power supply failure.

Hello,

We get these units into our shop fairly often and this issue is caused by a failure in the regulator in the power supply. You can get a replacement power supply here:

http://www.ccl-la.com/catalog/product_info.php?products_id=48

I hope this helps, if so please rate our solution.

BuddyMc

Used the remote,make sure the osd timer is off the 60s will not auto tv turn off.

Are you still having trouble?Please let me know.Thank You very much!
Tyler

Try the website like Remotes.com to order another original remote.The tv back cover model numbers,that all u need.Write it in the box it will provided will come up the right remote.

Are you still having problems,Please let me know.Thank You very much!
Tyler

This problems,i fix alot models of tvs all diffrent models of tvs but have the same board alway dies.The LCD inverter board is dead.This board help the LCD to have a backlight to go through the Turner board to produce a picture.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.The board is long in shape.It the easiest board to replaced in LCD tvs.