20 Most Recent Magic Chef CER3725AA Electric Kitchen Range - Page 9 Questions & Answers

0helpful
1answer

Gas ignitor switch willnot turn off feeps clicking

The spark module in the machine has gone bad an has to be replace to resolve this issue. If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3
5/29/2012 9:56:40 AM • Magic Chef... • Answered on May 29, 2012
0helpful
1answer

Where is pilot located

take off grates,pull up top of range follow gas lines from each grate if it is a pilot you will smell gas,if not you have intermitten pilot which is not operating it is electronic.before you remove turn off gas
3/17/2012 12:29:29 AM • Magic Chef... • Answered on Mar 17, 2012
0helpful
1answer

Oven will not light

check to see if both sides of the 220 are hot , had the same thing happen and found one side had come loose , which caused the breaker to trip in thr frist place
3/5/2012 1:03:09 AM • Magic Chef... • Answered on Mar 05, 2012
0helpful
1answer

Magic Chef oven 38HN-3TXW clock assembly

Hi John.I am sorry but the service manual for this model is not available. I hope that the following can help a bit.Parts for 38HN-3TXW are listed at appliancespartspro (here the link). As you know parts for the control panel are not available. Parts for similar models are available. I would contact them to find out if parts from models like 38HN-6TVW-SC are compatible.Here diagram of 38HN 6TV control panel, it is similar to 38HN 3TX, shown at partselect.com (that shows parts as discontinued). Here a list of models from 38HN series.A way to troubleshoot without service manual is running continuity tests between contacts at switch, relay board, control module and elements to understand how wiring is connected and to test wiring. In a second stage the job consists in reading voltage at relay board and timer contacts. Because of the safety issues involved, testing with power on must be done by a trained person.Where possible do continuity tests. About the corroded contacts at relay board check if there is continuity between the solder joints at the back of the board and the relay connectors (continuity means contact closed with zero Ohms or low impedance). The test is done with power not connected.
1/6/2012 10:17:00 AM • Magic Chef... • Answered on Jan 06, 2012
0helpful
1answer

I have a Magic Chef model cgr3760adh that the oven and broiler won't light.

Is it new? If you just hooked it up, it might take a little time to bleed the air out of the gas line. Also make sure that the gas valve is open. I know it sounds obvious but it is left closed many times.
12/7/2011 1:49:56 PM • Magic Chef... • Answered on Dec 07, 2011
0helpful
1answer

Magic chef gas range top burners will not stay light

This problem is almost always due to a defective gas valve. If you decide to replace the part yourself remember safety 1st, turn off the gas and disconnect power to the range.
11/16/2011 7:42:32 PM • Magic Chef... • Answered on Nov 16, 2011
Not finding what you are looking for?
Magic Chef CER3725AA Electric Kitchen Range Logo

Popular Tags

49 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magic Chef Kitchen Ranges

  • Magic Chef Kitchen Ranges

Most Popular Question

magic chef

  • Kitchen Ranges
Loading...