20 Most Recent Gateway kr-0350 wireless keyboard only - Page 9 Questions & Answers

the battery is above the ram slots next to the sata ports standing in a holder if that's your board https://i.ebayimg.com/images/g/GKYAAOSwnDZT8zKe/s-l1600.jpg

hi Karnarc. How do I troubleshoot my Gateway wireless keyboard and mouse? How do I troubleshoot my wireless keyboard and mouse? If you are experiencing issues with your wireless keyboard and mouse not working properly, perform the following steps to troubleshoot the wireless keyboard and mouse.

1. Make sure the USB connector from the receiver is properly plugged into a USB port on the computer. Some systems ship with the receiver already preinstalled in the unit itself. Please check your mouse to see if there is a receiver inside of the battery compartment door.
2. Make sure wireless keyboard is not on a metallic surface.
3. Ensure that the receiver is 8-inches from other electrical devices.
4. Try plugging the receiver into a different USB port to ensure that the USB port is working properly.
5. Check the batteries in the keyboard and mouse to make sure they are installed correctly.
6. Test the batteries to ensure that they still have a charge.
7. Verify the On/Off switch on the keyboard and mouse are switched to On.
8. Some receivers, keyboards, and mice may have a connect button. If so, follow the steps below:
   1. Plug the USB receiver into a USB port on your computer.
   2. Press the connect button on top of the receiver and the button will blink.
   3. Press the connect button on the bottom of the keyboard to activate the wireless connection.
   4. Press the connect button on top of the receiver and the button will blink.
   5. Press the connect button on the bottom of the mouse to activate the wireless connection.

Connect youra router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Your mistake was in trying to do a reinstall of windows. You could have, and should have, downloaded IE from Microsoft- either x86 or x64, depending on whether you are running 32 bit or 64 bit windows. Since what is done, is done, reformat the drive, and do a clean install from the disk with a newly formatted drive. That should work.

hi there. go to this link and see if its there. manual for zx4300 01e gateway all in one desktop Google Search

hi paul. this link might help you out. or you could try ebay. buy 1 Cooling fan Gateway CPU desktop model DX4720 03 Google Search

There is a number of things that could be bad. First is the cable between the monitor and the computer and since you said you checked all of the cable connections we can skip that. Next if you have a separate VGA board installed it may have come loose or may have gone bad. Next is that if your VGA port is built onboard the mother board it may have gone bad and in either case buying a seperate VGA card should fix the problem.

You may be able to reset it by removing and shorting the contacts in the CMOS battery or installing a jumper on the reset pins. How to Remove BIOS Password Using The Jumper Settings Password Recovery

Motherboard issue.assuming all the drivers are properly installed. Not uncommon. Use the remainder and if necessary get an adapter to increase the number of ports you have.

The Hard Drive is what is locked not the bios it seems. The hard drive may be encrypted by Veracrypt or some other third party hard disk encryption platform. The only way to unlock it is to find who encrypted it and ask for the password.

google the gateway site and download the driver for win10 operating system

Conflicting information entered here already; please clarify so you can be assisted. Which is bad/faulty? Is it your mouse (standalone type or onboard) you need help with or is it that your gateway nv5335u does not load past the boot screen? Which one or are these 2 questions lumped together? Post an update or feedback please

Is there a power light on your monitor? Check your connections at the monitor. Also if you have a surge protector with individual power switches, double check that you have power to the monitor

You are not doing anything wrong - your player is in its ***** throes and soon it will stop reading all disks all the time.. Start saving some money for a replacement.

Have you tried Gateway's website?

moved you out of HP. it's not a hp the does means the key board is bad. unplug the keyboard, see, it bad. gateway is defunct maker now, long gone. hard to find parts but ebay.

Not for this forum.

Either the OS is corrupted or you have an issue with the hard drive. Suspect that your hard drive is not being detected because its logic board is fubar. Go into cmos and see if hard drive is recognized. Definitely not good. Sorry