20 Most Recent Evenflo Aura 3s Co Stroller - Page 3 Questions & Answers

If it is the one that is on the end of a strap, at the end of the strap is a loop.
Feed the loop thru a small set of holes in the back of the seat. The seat should have 2 small, close to eachother, holes. It goes in one, out the other and then slide the clip thru the loop and pull it back tight.
The only other design I know of uses a screw to attach the belt, the clip is on, to to a nub with a hole in
it on the back of the car seat.
If by "clip" you mean the little bracket that looks like an "H" you thread the car's seat belt thru it, where the belt goes up to the highest point, and use the H clip to keep that part of the car's seat belt away from the child and car seat by weaving it behind the edge of the car seat.
Use Evenflo's site to download a free manual and it shows you how to do it. All you need is Model number and date of manufacture and it will give you your manual. Save it to your computer. Click this link.

Evenflo Care Seat Manual Downloads

Go to the Evenflo Site. Hit PRODUCT SUPPORT and scroll to the bottom. In the middle you will see Product Instructions. Click it. Then put in your Model number and Date of Mfg.The page that opens is a parts order form but in the middle is a $0.00 charge PDF file of both the stroller and Car seat instructions. Try this link if you can. It may take you right to it. Good luck.Evenflo Product Info LinkOr just go to Evenflo's Site Link that is www.evenflo.com

lean to the side...

Try Products America, we offer a wide variety of replacement hardware. We will ask you specific questions to determine if we can help you with this missing mattress spring frame. Visit our website www.productsamerica.com. Email us at [email protected]. Call us at 800-205-9642.

How do I instal it

• Hi, I can help.

• You can obtain a free manual for a Evenflow Car Seat model # 5581356 manufactured May 11, 2005, and stroller if you choose (separate manuals) for free here https://plweb.evenflo.com/product_search.aspx?txSearchModelNo=5581356&txSearchDOM=5/11/2005

• When you get to the page, in the middle of the page, scroll down to #8 (stroller) and #9 for the car seat "port about."

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

I tried finding that model number,, its a white sticker on the tubing of the rear leg, or on the tubing of the basket., it should also have the manufacture date on that sticker, if you can locate that I can probably help you with the part you need

To: fallows545 on Jan 01, 2011

Do you still need the Manual for the Evenflo Traditions Car Seat Model # 3281722CL1.
I have one and could photocopy it for you.

Google the products brand and model name and ask for a owner's manual or ask jeeves

High Chairs On the back of the seat on the warning label or on a white sticker. Could also be located on the underside of the seat behind the foot rest on the tubing. It would help to know the Model Number and the date of manufacture. Look on the back of the high chair seat on the warning label or on a white sticker. Could also be located on the underside of the seat behind the foot rest on the tubing.

One you have the Model Number and the date of manufacture go to the following website and enter the inormation requested. The instruction manual should be free.

https://plweb.evenflo.com/replacement_parts.aspx
High Chairs On the back of the seat on the warning label or on a white sticker. Could also be located on the underside of the seat behind the foot rest on the tubing.

High Chairs On the back of the seat on the warning label or on a white sticker. Could also be located on the underside of the seat behind the foot rest on the tubing.

there should be a strap in the middle of the bottom/bed portion that you can push down or pull up on.

I have an Evenflo stroller and if it is like mine the handle where you would push the stroller at should have a red area with a yellow button it the center of it. Place your hand on the button and squeeze up on the yellow part then back towards you on the red part. Sorry if I didn't explain very well hopefully you get the idea and it works! Also as you press these buttons kind of pop it up then I use my foot on the bar between the rear wheels to hold it down while clicking it into place. This button also folds the stroller back down. Good luck!

Very simple. On the bottom of the car seat adjust the harness anchors on each side of the car seat and slide those through the slots that you need adjusted. I have the user manual if you need it. Email me at [email protected] with your email address and I will send it to you.

Hello

Here is a website you can take a look at. The evenflo site shows any recalls as well. http://safety.evenflo.com/cs/sc/cssc_RD.phtml I hope this help you out. Please let me know.

Thank you

Hello,

I would think it would be best for you to call the customer support number so they can walk you through step by step. US: 1-800-233-5921
Canada: 1-937-773-3971

Good Luck!

Hi,That link has the instructions for your evenflo crib.Make sure you have Adobe Acrobat Reader to view it cause that's what it opens the instructions with.This will help. https://plweb.evenflo.com/product_search…

Thanks for using fixya and have a nice day

Don't! The seat was manufactured with the 5-point harness, and it was designed to be used only that way. Don't risk your child's life.

Evenflo has a GREAT website section on using and installing their carseats. The manufacturer is the final authority on keeping your child safe in their seat: don't accept advice from anyone else!
http://www.evenflo.com/sme_carseats.aspx?id=321

You also ought to have your instruction manual for reference: order it for free, at this link:
https://plweb.evenflo.com/replacement_parts.aspx

Match the red arrow on the fabric seat to the middle of the seat back. Use a crochet hook to fish the elastic straps through the slots. Pull the elastic straps to hook on to the tabs on the lower rotator fastener. The key is to pop the fabric seat up into a cone, so that you can see what you're doing.

i plug in the model # in at www.parents.com
in the recall finder...and it came up no results.

http://www.parents.com/product-recalls/search/?recallCategory=2&timePeriod=0&searchString=0151614&_requestid=185218