20 Most Recent
Jack Lalanne Power Juicer 250 Watts - Page 5 Questions & Answers
How do you disassemble the jack lalane juicer?
You use your Orange cresent tool with the 2 metal thingies on the bottom of it. Take off the top of the juicer. Then get the tool and then stick the tool where you see the two holes. Hold down the spinning like grater, and use the tool to turn counter clock wise. Once you do that the Middle part will come off.
I am taking my juicer apart. I took the three
Don't take the screws out! That plate is not meant to come off.
The filter unit is removed from the base by unscrewing it counterclockwise using the two holes in the plate that you unscrewed. The juicer originally came with a plastic tool with two prongs that fit in the holes and acted like a sort of handle you could use to unscrew the assembly.
If you don't have the tool, you can use two small screw drivers or jury-rig a tool out of a piece of coat hanger shaped into a U to gain leverage to dismount the entire filter/blade assembly for washing.
Hope this helps!
The blade wont spin even
Have you ensured that the blade is securely screwed into the drive motor? Using the two-pronged tool that came with the juicer (or, if you've misplaced it, a DIY solution like two small screwdrivers), make sure that the blade unit is screwed clockwise onto the drive motor. There should be two holes on the inside of the blade unit, at the bottom of the "bowl." That's where you remove the blade unit for cleaning and reattach and tighten it.
I just got a jack
The part has a lifetime warranty. Just call the customer care line at 1-973-287-5150 and give them your model number. You have to pay shipping though. shipping cost was about $26
Not finding what you are looking for?