Vizio L32 32 in. LCD HDTV - Page 9 - Answered Questions & Fixed issues
Have a vibration in the sound quality
Sounds like a bad speaker. Only parts affected are main board and speakers, but more likely that it is the speakers. Does it happen all the time on all sources?
Blurry picture on my 70" vizio
As previously mentioned, try a known good DVD to the same connection (BE SURE TO USE A DIFFERENT CONNECTING CABLE,as your connect cable may be at fault) Also try any of your other inputs to the TV to eliminate 1 or more input issues.
Picture doesn't fit the screen
Its a function of the source and the tv picture settings. Go to the source (direct tv, cable, co-ax?) menu , settings and look for screen display sizes.
Your remote has a red dot "wide" button which will also have a screen size effect. You can cycle through the formats
For further info why not read/print out the manual?
http://store.vizio.com/documents/downloads/hdtv/L32/Manual.pdf
POWER BOARD
For proper part you might contact manufacturer. you will need your complete model & serial number.
if unable to locate there you min try ShopJimmy.com. again you will need the complete model serial number.
gemagm
Had update message now remote does not work
first double check the transmitter batteries, then you might try to re-download the update making sure you give it time to completely process the download.
If this does not resolve the issue, then I recommend contacting the manufacturer to let them know there may be an issue with the update.
You will need to have your complete model & serial available.
For assistance, please call (877)-698-4946 or email
us at
[email protected].
gemagm
Thin red line across screen two inches for the
Hello,
IF YOU HAVE A SOLID BLACK LINE RUNNING VERTICALLY THEN YOU HAVE A FAULTY MATRIX INVERTER. IF CENTRAL THE MAIN VERTICAL INVERTER NEEDS CHANGED. LEFT = LEFT VERTICAL INVERTER RIGHT=RIGHT.........
ANOTHER WAY TO GET THIS FAULT IS WORN OR DAMAGED RIBBON/PLASTIC GOING FROM THE SCREEN MATRIX TO THE INVERTER
Hope this will help out.....
How to watch netflix on my tv
Had changed a credit card payment. Now I bring up netflix and load in a show and I get a pop up that says to go to netflix.com/payment.You have the payment solved but Flat screen is still stopping at the request load.
Vizio 42" LCD HDTV - sound went out
Same thing just happened to me contacted Vizio had me unplug the TV from the wall for about a minute and then replug and cut the TV back on and everything was fine. I have the television hooked into HDMI1.
DnCan't change channels using the remote or buttons on TV. The channel scan will not work either. I
Just a few ideas for you -
Go to some cheap box store and buy a universal remote, they can be real cheap. More than likely, your remote died. Make sure you know your make and model number so you can get the right one.
You didn't say if you have cable, but if you do, reset that connection and let your satellite reboot, see if that works.
Doesn't that tv have controls on it, so you can manually input the channels and adjust sound?
Good luck, Curt
Not finding what you are looking for?