20 Most Recent Vizio L32 32 in. LCD HDTV - Page 6 Questions & Answers

Purchase a vga cable and hook it up to the computer and then to the tv I’m happy to assist further over the phone at https://www.6ya.com/expert/lou_afa492c634393790

go in your menu an turn of the surround sound it kills the loud music in the background

go to the on screen menu and adjust the aspect ratio

Many electronic devices have a schematic glued to the inside or the housing. Usually viewable through a service panel.

This is not a user fault. Can be the main board or power supply fault. You will have to try to verify. May pay to replace the set of out of warranty.

Panel fault. Contact the authorized service center. http://electronicshelponline.blogspot.com/

power board

Corrupted firmware. A firmware update is necessary. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

If you need remote code, because you don't have your original remote, you should buy a universal remote listing your TV . If you already have a universal remote but don't have the user's amnual, feel free to indicat make and model so someone mght help you to get it, with codes

Log on your universal remote controls manufactory's website, search the model of your remote control (the model number is ether printed on the remote control face bezel, or inside of the battery compartment), then you will be able to download the user's manual, and find the code, or do a code search.

It is probably the power supply unit try to open it up and measure the voltages if you know how to.

You'll need to update your cable box with one that has an HDMI out port on it. Nothing else will work.

you need to replace the power supply www.shopjimmy.com

I need more NFO. 1. What is the make model? 2.Does the picture roll with All input sources? Say from DVD player? Cable? Etc? Duke

Did you ever find a solution to your issue? I just had the same thing happen, and am concerned that the digital tuner is shot.

Go,to menu and check audio options. Put audio in surround mode

Enter a false connection allowing you to move on.

There may be some components failing in the power supply or one of the circuit boards that are causing too high a current pull.

I realize that this answer is very vague. Without doing proper diagnostics, it is impossible to guess at something like this.

Out of warranty repairs on these sets can be very expensive. I would suggest that if the set is going to be expensive to service, it would be best to replace it with a known brand name that offers an extended warranty with local service. You will pay more, but you will have dependability and better quality.

Jerry G.

It is possible the remotes are either bad or not compatible to the tv. Recheck the remote type and the batteries to see it that helps.

If your audio is being routed through a home theater system then you will not get vol control through the remote for the TV. You will have to use the home theater remote.