Graco Quattro Tour Travel System - Answered Questions & Fixed issues

Hi We would advise you to contact Graco for assistance Contact Us Graco

I want to inform you that one agency in my mind, who will be able to give you all the services in the Sullivan County is Sullivan County Visitors Association. Check out more: Sullivan County Visitors Association

I think you can go to Inn at Lake Joseph at Forestburgh, New York. It is a best place for recreational activities. Check here: Things to See Do in the Catskill Mountains Inn at Lake Joseph Sullivan...

I think you may consult with trip planner who is specially for Catskills, New York. Example: Trip Planner

hello p zotyo, i would start here, http://www.gracobaby.com/customerservice/faq_category.aspx?catID=9 then if that didn't work call here, http://www.twenga.co.uk/dir-Children,Equipment-for-babies,Pram
if those don't work i would keep your eyes peeled on ebay and craigslist. for a simular stroller.
I look forward to your posts

You can order replacement parts for the Graco travel system on Gracobaby.com:http://www.gracobaby.com/ReplacementParts/Pages/ReplacementParts.aspxYou will need the model # as well as the date of manufacture.

Hiya, call this number 0844 412 1212. It is gracos spare parts department. I used it recently to order a spare part for my Graco Cleo. They are very helpful. debs

Hi We recommend you contact Graco http://www.graco.co.uk/

To get the basket of your stroller please call Graco at 800-345-4109 (US) 800-667-8184 (Canada - 8:30am to 5pm EST) They will sell you the part.

You can get most replacement parts directly from Graco: http://www.gracobaby.com/ReplacementParts/Pages/ReplacementParts.aspx

There are Graco Stroller manuals Here there should be one similar to yours.
www.karlisles.com.au/baby_repairs_spares/instruction_booklets/

www.gracobaby.com/CustomerService/ProductInstructions/Pages/default.aspx?page=ProdInst

Google plastic welders and find a local guy. If its black the repair will be almost invisible.

hi here is a video link that shows how to unfold your information plays at 3.11mins

http://www.youtube.com/watch?v=fy9dJ4NTwF8&feature=channel

Hi, did you check the Graco website?

http://www.gracobaby.com/ReplacementParts/Pages/ReplacementParts.aspx

If you input your model number and either serial number or manufacturer date (found on the sticker on the stroller) you can browse through Graco's available replacement parts and find out if they have those wheels or not.

Good luck!

Hi, if you go to Graco's replacement parts page you can find out if that cover is available directly from the company:

http://www.gracobaby.com/ReplacementParts/Pages/ReplacementParts.aspx

All you need to do is enter your model number and either serial number or manufacturer date (which you can find on the sticker on your stroller).

Hope they have it!

Hi, when you say front tray, do you mean the snack tray? If so, there is one currently being auctioned on eBay, with only two bids so far:

http://cgi.ebay.co.uk/NEW-Clip-on-Childs-Tray-Graco-Mirage-Pushchair-/120632927558

You will need to know your stroller's model #, but you can easily use that along with the style of the stroller to get the manual directly for the link below: gracobaby.com/ProductInstructions

I hope this helps (remember to rate this answer). Nice weekend.

I know this sounds a bit cheap, but superglue/adhesive is too brittle to make a good fix. Especially seeing as the unit cracked unevenly.

I took the unit off the arm of the pushchair by pushing the little metal clip in at the bottom and pulling it down.
The rest of the unit which was still inside the wheel needs a pair of tweak nose pliars and a flat head screwdriver (and a lot of patience). You need to use the pliars to grab the unit in the middle of the little circle, then use the flat head screwdriver to push in once side of the expanding clip in the middle.

Once you have both broken parts, hold them together in the correct place and wrap A LOT of cellotape around the two bits. Then clup both bits back on and hey presto, it works!!

Just taking it for a "road test" so to speak now, but it was an easy fix. You just need to be careful when removing the parts that you don't break them beyond recognition!

I tried to pull the two parts apart with my hands after and to be fair, the fix is probably stronger than the original flimsy bit of plastic.

If anyone wants any help on how to fix it (pics or more of a descriptoin of how to get this bits off) drop me an email at [email protected].

I have the same problem on both front wheels of a Graco pushchair I inherited. I took the wheel assembly off and had a friend weld steel washers onto the end of the frame and then I pushed the barbed plastic pivot in. It worked for a bit but damage to the plastic barb causes the wheel assembly to fall off without much encouragement. Now looking for Plan B. It may involve more welding and modifications. Not sure what Graco parts cost but would imaging getting them to South Africa where I live would be prohibitively expensive. – MH