20 Most Recent
Keurig B60 Coffee Maker - Page 7 Questions & Answers
The power won't come on. Is there a reset switch
thermal fuse has blown there might be 1-2 of these ,non resettable they are about $ 8-10 dls us @ Radio Shack rated @ 8-10 amperage and have a thermal F rating too. need a test meter to check inside. if this unit cost $ 20.00dls ? get a new one. we seem to just throw things in the trash lately , since everything in made overseas, sorry ?
HOW DO I PRIME MY KEURIG
Descale your Keurig. Take a paper clip and stretch it and place it in one of three holes in the off the Take filter out, fill reservoir with vinegar.
How to descale a Keurig
Fill it with a 50/50 mix of distilled white vinegar and water. Run it normally, but without using any full K-cups (it's OK to use an empty one if it refuses to dispense water without a K-cup in place). Catch all the vinegar/water that comes out, save it, and cycle it all back through one more time before discarding it. Last, repeat once with clear fresh water before making coffee again.
Why cant I get a full cup of coffee
Brewing a Partial Cup
If the brewer is not brewing the full amount selected, it may be caused by the following:
- The exit needle is clogged by coffee grounds or cocoa mix. Please refer to the K-Cup Holder cleaning instructions.
- The brewer needs to be descaled. Please refer to the descaling instructions.
- The removable water reservoir was removed during brewing. Place the water reservoir back onto the brewer and perform a cleansing brew without a K-Cup pack.
Water does not go through the k cup. when the cup
Hi,Yup... the bottom needle is plugged...Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.Keurig CoffeeBrewer not making a full cup of Coffeeheatman101
What does brewing time off mean
You can try the reset for the B60. I do bot understand your original What does brewing time off mean??...
1. Simultaneously press and release "small mug" and "medium mug". Immediately afterward press "menu" 3 times. (Menu is the black button under the display screen.) You should see a time 6:09 on your screen.
2. Press "menu" once. Your LCD screen should say Brew 0:00.
3. (I messed this step up like 10 times and had to unplug the machine, then replug it and start over at step one. You have to unplug if the LCD displays "auto ____". If it continues to flash "Not Ready" and "Brew" then you can just keep trying step 3). Press and hold "medium mug". While holding "medium mug" press and release "menu". Immediately after pressing "menu" (while still holding "medium mug") press "small mug". Release "small mug" and "medium mug" at the same time. This entire thing needs to be done very quickly. as soon as you release "menu" go to "small mug" and release both buttons quickly.
4. Unplug the machine (do not turn it off). Wait for 3 seconds or so. Plug it back in, turn it on and follow the instructions for priming.
Not finding what you are looking for?