Brother MFC-8460N All-In-One Printer - Answered Questions & Fixed issues

The error indicates multiple problems, and needs to be serviced by a ASC Brother Center. Go to brother.com and go to support and then service center then enter your zip code or you can ship to us since we are a ASC Center for Brother.

Please see the control panel display (any error code or problem issue)

did you also enable overseas mode? https://www.voipmechanic.com/voip-fax-settings-brother.htm

Try re-installing the scanner software - if you don't have the disc you can download it. The scanner is a very delicate mechanism so is easily damaged - if the software fix don't work maybe it is kaput

Have you replaced the Drum unit? Drum unit on Brothers can be reset if copy is good and you do not want to replace. If copy bad replace Drum. Rebuilt drums work as good as original at half price.

Menu-Fax-Report settings-xmit-OFF-ok

first open the front cover, Then press the clear\back button. When the machine displays "replace drum? press *00 and close the front cover

Sensor that detects paper needs to be replaced. Same thing happened to my machine and I had to take it in to a Brother repair company. 1 hour service call

The paper feed kit is the pick up rollers and the transfer rollers. You can thake those out clean them and replace them, but unless you are actually having paper feed issues usually just clean the paper tray feed rollers with alcohol and reset the paper feed kit counter if needed.

ControlCentre3

Are you talking about the document feeder or the copier. On both counts try to clean the rubber wheels above the feed tray, or up on the document feeder with something like windex or a water cleaner. make sure the wheels are dry, and watch to see if the wheels are turning. If wheels are turning when you feed you need new wheels, sometimes you can rough them up with a grit nail file, or sandpaper.

Needs Drum If you pull the drum unit out you will see on the drum different shades of color lighter is wear the lines come from. Buy a rebuilt drum much cheaper and they work, may have to reset the drum count if the change drum lite on...

. To reset the "Toner Life End" message on the Brother MFC-8460N Open door press Clear/Back key

Go To Below official Brother Printer Page For Your problem, How do clear the message Document Jam from the display Brother Still having Problem Then follow Us For Brother Printer Support

taflon and fuser & praser roller replace problem sol.....

MAY BE DRUM UNIT IS END OR LASER UNIT JUST SEND A COPY VIE MY MAIL [email protected]

mfx 2010 call service

Measure the distance between the dots and that will give you the answer to which roller is causing the problem I believe the Drum is the only roller large enough to just cause three dots. If you need further help, I’m available over the phone at https://www.6ya.com/expert/kevin_6c091a6aba0555a3

Wrinkled Envelopes in Brother Printers and Multifunctions If you need further help, I’m available over the phone at https://www.6ya.com/expert/kevin_6c091a6aba0555a3