20 Most Recent Brother DCP-110C All-In-One InkJet Printer - Page 7 Questions & Answers

scanner error 5

The paper issue is personal but as general glossy paper will damage the head aas it leaves wax on it and you may try jus any paper that you like starting from light weight to 25% as far as the print location it is the setup on the computer not the printer, try to use cheep paper and try few setting tell you getr the correct setting for the printer also make sure that when you put the papers the sides are close to the paper and sopporting them good so they do not move

Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the
error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
1. Pres 'menu', 'mono start' then 'menu' one by one...
2. Press the arrow up or down to go to 'maintenance 80'.
3. Press 'mono start' several times to go to'Purge'. Finding the PURGE will show some numeric value
which is Iassume the number of times the printer had cleaned.
4. Press 'arrow up' key and scroll for number "2" then press "set".Do the same for numbers 7, 8 and 3.
After you have entered this combination, the purge numeric value will be reset to 00000.

Unfortunately this is an error in print head and need replace.New print head will cost you as much more then new printer then think about new printer.

Plug in your machine while you hold the stop button, with all the full inks installed, sometimes this machine can be stubborn.

Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the
error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
1. Pres 'menu', 'mono start' then 'menu' one by one...
2. Press the arrow up or down to go to 'maintenance 80'.
3. Press 'mono start' several times to go to 'Purge'. Finding the PURGE will show some numeric value
which is Iassume the number of times the printer had cleaned.
4. Press 'arrow up' key and scroll for number "2" then press "set".Do the same for numbers 7, 8 and 3.
After you have entered this combination, the purge numeric value will be reseted to 00000.

Only thing you can really do with something like this is.... Unplugg it, blowout all the dust, use some cutips / rubbing alcohol to clean the heads and anything that you would think "grabs" the paper. Turn it on and hope for the best!

Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on
the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the
error is 46 the waste ink tank is full.Follow this:
1. Pres 'menu', 'mono start' then' menu' one by one...
2. Press the arrow up or down to go to'maintenance 80'.
3. Press 'mono start' several times to go to'Purge'. Finding the PURGE will show some numeric value
which is Iassume the number of times the printer had cleaned.
4. Press'arrow up' key and scroll for number "2" then press "set".Do the same for numbers 7, 8 and 3.
After you have entered this combination, the purge numeric value will be reseted to 00000.

cleane the head then try again

Try this procedure and let me know how it goes

1. Scan the page you want to convert into a Microsoft Word document.
2. Save the scanned image in *.gif, *.jpeg or whatever format.
3. Open that image, go to "File->Save As" and name it "xyz.tiff" in the "TIFF" format as shown.
4. Go to "Start->Programs->Microsoft Office Tools->Microsoft Office Document Imaging"
5. Go to "File->Open" and open your scanned document that has been saved in *.TIFF format.
6. Go to "Tools->Send Text to Word." You will get a prompt stating this process will take time, Click OK. This will take some time depending on your computer's speed (a minute or two at the most).
7. When it's done it will open up Microsoft word on its own and the scanned document will now be in editable mode.

lift up the hood and its inside by the ink

No.

It is the printhead, it comes 2 ways, with or without the circuit board, I usually only change the printhead only and it works fine.