20 Most Recent
Brother MFC 7420 All-In-One Laser Printer - Page 5 Questions & Answers
Paper jams brother mfc 7420
Paper Jams are routinely caused by bad roller in the printer. The Heat of laser printers can render these rubber roller pretty useless in a couple of years or less if you print often. If you have recently replaced the drum (according to the recommended print output number), Then If an $80 dollar roller + labor is worth it to you, go for it, otherwise buy a new printer and Brother gives the best ink value per page. hope this helps.
Hoow to setup fax in printer brother mfc-7450
Hi,I need your help, now i use a MFC-7450 printer I have driver and i try to install many times but it has a problem on the step asking me to plug the USB cable and switch on the machine, it messages me wait for long time it still dosn't work and can't click "Next". How can i resolve this?Cheers,khone,
Cannot set up fax
You may go to the Brother web site. Go to support and enter MFC and model number and download the manual and do it yourself or you may call Brother and they would be more than happy to walk you through it. The MFC do not have to be under warranty. I just called them the other day for help. May have to wait anywhere from 15-20 minutes if you call on Monday or Tuesday.
Paper jam
make sure ur paper lined up and in the right angle
Printer doesnt come out of sleep mode (Brother MFC7420)
I'd be happy to give you the solution to this problem :)
You'll want to go into the menu and choose these options: 1,6, and 2. The final stop should give you the sleep menu.
The printer is setup for a default of 5 minutes. But you can change it from 00 to 99 minutes. To just shut it off, press the Options and Start button simultaneously and that will do the trick.
Here is the link to the manual:
http://www.brother.ca/en/products/pdf/manuals/MFC7820N-UG.pdf
If I wasn't specific enough, the solution is on page 2-6
-Ernest
Copying legal size on a Brother MFC 7420
This is for a temporary, as needed solution: Press "Menu/Set" button. Select "General Setup". Scroll down and select "Paper Size", find and select "Legal" size. Press Menu/Set button again. Press "Stop/Exit" button.Insert legal size paper to be copied on the feeder tray and put a legal size paper in the Manual slot. Hit "Print"You need to do these same steps again to return the settings to Letter size again.
Not finding what you are looking for?