20 Most Recent Hotpoint Ultima WF860 Front Load Washer - Page 9 Questions & Answers

F10 meanswater level pressure switch not sensing correctly, there could be a blockage in the switch hose or chamber, or the switch could be faulty.

I also have this problem and been searching the internet high and low still cant find a supplier can you help??

I think you mean F05, in which case it means that the pressure switch is jammed on full.
You need to remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well, and look inside the pump.
This should solve your problem.

Please check this link for some tips:Smelly machine

351546011464507

The whirlpool duet is one of the machines that have a main computer control that operate and monitor the functions of the machine,

This control is usually mounted behind the front panel,sometimes at the back or to the side, it also has a speed control board that is mounted on the bottom usually at the right side.

Whenever a problem accur there is a fault code displayed on the machine, there is a technician sheet with the fault codes on the machine, the technician can use this guide to go directly to the problem,

This f02 code mean there is a problem with the drain, there is a drain filter that sometimes get clogged with lint and other things,

Removing the kick plate and removing the drain access on the pump will reveal the drain filter, use a small bucket, and towels to catch the water that will be in the pump, after cleaning and re assemble the washing machine should work ok.

Performance Chips For Ford

Simple low cost alternative to ceragem compact cgm p390 & ceragem master thermal massager beds. All the Carefit devices are very easy to use at Home for natural & preventive healthcare and create miraculous health benefits.

Error code F04 means pressure switch jammed on empty.
Do the following.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside the hose.
Remove the hose on to the pump, and check for blockage or obstruction here as well.
Please rate my solution.
Thankyou.

the water is not pumping out because you have a blockage in the filter unit which is located at the bottom of your machine or possibly a weak pump. the reason that your machine smells is because the water is not discharging. check the filter first for any blockages, i.e coins, bra wires etc. if that doesn't sort it you may need a new pump