20 Most Recent Nokia 7210 - Page 2 Questions & Answers

You need to call AIRCEL.
Only they can give you your PUK code.
You will need your IMEI number from your phone. It will be under the battery or if you can...Type. *#06# into the phone and this should tell you your IMEI number.

You may try asoftech photo recovery which helped me before. You can download trial for freehttp://www.asoftech.com/apr/Please be noted that your phone memory should show as a drive letter in your explorer, if not, you need to take out your memory card and connect using a card reader, or plug-in to card reader slot if there's any on your computer.

Dear User its better to bring your mobile handset to your nearest Nokia care center because you need a factory reset for this. They have different software and devices for this and only a expert can operate this flashing software so you should visit to nokia care for your permanent solution....Thank you for uploading your problem in Fixya

I think you should format you phone then it will show missed calls

Check the time/date of your phone, Set it to Automatic updated. Problem will be solved.

hard reset the device

how to format my nokia e5 mobile

Yes all the other application should work.First follow the steps i have given and if possible SCAN Virus of your mmc .Because the Music player might infected by virus

First download and install Pheonix. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link7210c flash file or Nokia flash file and install it to C / programme files/pheonix..after finished this installation open pheonix Inside the interface at the> left top <there you see "File" click there and choose "open file" and then select the approprait Product type i.e"which is written in the back banel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there when you click there you'll see three icon just select the "Firmware Update" again you'll see another interface.Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Botton and choose the code which is written in the back side of your phone.e.g CODE:0000000.if the same code does not found just take one.After this you can see "Dead phone USB flashing" click that box.Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" after this, a message will prompt you "press power botton" press it and wait untill the phone will Restart automaticlly in normal mode 10-15 minutes.If you cannot understand just make a Reply thanks for visiting fixya.Good luck

nokia 7210c light ic jamparing

post your imei i will try to give master password

use phoniex to download latest firmwear and flash(rebulesh) with phoneix service tools hope prb. solve

A PUK code is a "Pin unlock code" it is used in mobile phones. This code unlocks the SIM card to allow access to your mobile phone. If you enter this code incorrectly several times, then the SIM card will be locked permanently and you will need to purchase another SIM card from your mobile phone provider.
The PUK code is with the documentation that came with your SIM card, if you no longer have the documentation, then you need to contact your phone service provider and ask them for the PUK code.

change or replace it

reduce the volume, sound will get clearer!!