JVC Everio GZ-MG50 Camcorder - Answered Questions & Fixed issues
I cant find my book
You can download the manual from the manufacturer's web site at
http://books.jvc.com/booklist.asp?Model=GZ-MG50US
5/6/2011 5:42:43 PM •
JVC Everio...
•
Answered
on May 06, 2011
•
116 views
I have downloaded all my
Hi.
1) Remove the memory card and test again. Ensure that camera is not set to record on SD card. See pages 21 and 48 on manual
2) Reset the camera to factory settings. See page 40 on manual.
3) Format the hard drive. Use the built in FORMAT function in camcorder menu. See page 20 on manual
If you still get the problem after performing the steps above, then the camera hard drive is defective. In that case call JVC at the number listed on manual.
Here the manual.Regards.
Ginko.
1/13/2011 4:45:53 PM •
JVC Everio...
•
Answered
on Jan 13, 2011
•
76 views
Cannot see image through view
it is stuffed up if it as warrenty send it get it repaired if it doesn't give it to a proffesional to repair it for a cheap price...
6/6/2010 4:14:21 AM •
JVC Everio...
•
Answered
on Jun 06, 2010
•
71 views
Ro record, and no image in the screen on the camera JVC GZ-MG50E
I answered same problem like you have now. Just in case you don't find it. I hope you are familiar with these things technically. Open the set up-to where the lens can be accessed, remove the iris unit and clean those two curtain(shutter), for sure it's stucked up. You san test it by moving it open manually and it must close when released. To clean, you have to remove these curtain out from the assy. Spray with head cleaning agent or any alcohol base cleaner and dry.Test iris unit first to make sure its ok before assembling. Good Luck
3/16/2010 4:15:42 PM •
JVC Everio...
•
Answered
on Mar 16, 2010
•
229 views
L can´t turn on my gz-mg50 camcorder
I had the same problem, it was the switch. I opened it up and resoldiered the joints. This fixed the problem for a while but it went back the same way. I wouldn't advise doing this yourself as I did it a few time, now it is broke as I ended up meltying the switch and it snapped. Get a professional to do it.
12/23/2009 1:41:22 PM •
JVC Everio...
•
Answered
on Dec 23, 2009
•
126 views
Soft wear
you can download from here the software of this camcorder:
https://www.jvc.ca/en/consumer/service/s_downloads/default.asp
its name is: Digital Photo Navigator 1.0
12/9/2007 8:42:08 AM •
JVC Everio...
•
Answered
on Dec 09, 2007
•
286 views
Power not on or USB device not compatible
Hi,
I think your battery is 100% OK, if the power supply is perfect there may be problem with the switch, clean it with contact cleaner spray often press the switch several times.
if the switch contacts are not connecting, this will help it to clear it.
open the cam, check the power supply on the main board, there is a
small fuse on the circuit board test it with. eventually we have to suspect the mother board. if so should change it.
3/24/2016 9:20:55 PM •
JVC GZ Video...
•
Answered
on Mar 24, 2016
•
148 views
I can not access the menu on my jvc everio gz-mz37u to reformat the hard drive and HDD error is still showing, please help.
Hi,
first of all my advice is: if you keep any electronics devices without usage for a long period, you must detach the battery/power supply.
in this case I think the hard disk may be faulty, if you can open the camera and takeout the HDD connect with an HDD dock connect the dock to your system, in normal condition your computer will detect the hard disk, if so you can save the contents to your computer or you can format it, if it is not detecting your computer it means the HDD is physically damage. please change it.
3/24/2016 9:07:52 PM •
JVC GZ Video...
•
Answered
on Mar 24, 2016
•
185 views
Not finding what you are looking for?