20 Most Recent
JVC GR-D270 Mini DV Digital Camcorder - Page 3 Questions & Answers
I can record/play a video, but during play back there's no sound.
Check your display(on screen) do you see a word "NARRATION"? if so switch that off(can be found in the menu). Or it could be your internal speaker busted. To confirm connect it to your TV, sound must be heard on tv. Otherwise, have it check by the expert. Good luck
My camcorder is on a safeguard mode, how do i take
Please go further down on the message, you must see a numeric code, like 03, or 02. In case you'll see 03, open the cassette door(let it open until cassette come out) about 5 sec or more(make sure you have enough batt. charge or use adapter). Once ejected do not use that cassette again. Using new cassette and same thing happen, have your camera checked by the expert. Error code other than 03, you need to consult the expert. Hope it helps
Unable to export video from camcorder to PC
Get a 4-pin Firewire cable. Plugs in just below power plug slot. What plug you need on the other end depends on your computer. You can get Firewires in 4 to 4 pin; 4 to 6 pin, and 4 pin to USB. My laptop is configured to take a 4 or 6 pin Firewire but my desktop only has USB. I transfered using 4 to 4 pin and it worked great. No drivers, no discs needed...at least with Vista. As soon as I plugged in the camera, I was asked to whether I wanted to transfer from biginning of tape or at currenty location. I chose from the beginning and the camera automatically rewound and strated to transfer to the PC. I don't know if it would work same way with 4-wire Firewire to USB but assume it would. Cables around $35 but I purchased at Circuit City for the going out of business discount. I also bought some SD cards so I can take snapshots and transfer them too for print.
Get a firewire and you should be fine.
C
I have a used GR-D270U JVC camcorder, can't record w/it?
You can get a free membership on this
site and download a manual, where, on page 18 of the pdf
document you will discover that the recording button is at the rear of the camera, at the top right hand
corner of the battery and at the lower right hand corner of the viewfinder, you can get tapes anywhere, even drugstores, and simply select memory card recording to record to your chip.
GR-D270
Try taking the pictures in the AUTO mode, if the pictures are good in LCD panel they should be good on pc also, so it is not a download problem.
Camcorder in safe mode won't
Remove the battery and let the unit rest for a few hours, try again.Tap the tape door, the tape may have become lodged. If this doesn't work then you will have to send it for repair.
Safe mode is to protect it from any more damage.
Downloading videos to a pc
here some steps on how to transfer it to your computer.
- Install the cd driver camed with your camcorder to your pc
- Use USB to connect your camcorder and your pc after that it should be recognize
- If not then do step 1
- Use Ulead movie producer or Windows movie maker or any Video editing software
- Upload it and let it stream
- After uploading all videos save it on any various types of videos you like
Now your videos are on your computer
thank you for using fixya
CHARCOIS
Movies
Firewire is the only way to transfer unless you are running Windows 98 as those are the only USB drivers available for this camera and wont load on XP or Vista.
Not finding what you are looking for?