LG L1915S 19" LCD Monitor - Answered Questions & Fixed issues

old monitor , no PC stated, nor cable used < VGA> test this old monitor on 2nd PC, if fails the monitor is bad. it is 14 years old today, 2005 made all this old are bad the toxic CCFL lamps go bad long ago. best is the recycle center, it and buy only monitors and laptops 2010 or newer, or you get CCFL backlamps again. the monitor this old has near zero street value, and repair costs are huge, nobody puts $1000 saddle on a $5 15 year old horse, The CCFL panel can cost $100 and 1 to 2x that for labor a used monitor is like $40 ,even walfart sells them called refurbs.

Hi, Afraid the only operating system now is windows 10 on any PC unless your using a Mac system. Once you upgrade to windows 10, everything will automatically set everything correct for you & you will be surprised how it will speed up your system! this is the best Microsoft release operating system they have ever made. Please leave me feed back: Malcolm Campbell, Thanks.

hii this is lisa and am expert to solve your issues that you are facing and call to this number when you are free +1(518)348-9393, we feel glad to help you to resolve your problem thak you

You should be able to adjust the settings on the monitor to prevent it from going into power save mode, or at least to delay how long it takes before it goes into power save mode. Press the menu button and look for settings that might disable or change power save mode.

Also, does your desktop/PC display show anything before the monitor goes into power save mode? If nothing comes up, its possible that you have a loose VGA connection or that your video card/motherboard are defective in some ways. Try using a different monitor.

If the other monitor works fine with your computer, try changing/lowering the screen resolution. If in XP right-click on the desktop and go to Properties, and select the tab for display settings and adjust the resolution. If in Vista/Win7, right-click the desktop and select Screen Resolution/Display Settings and adjust it there. Then check and see if your newer monitor works on it.

If the other monitor also doesn't show any display, most likely the problem is either with your video cable or your PC's video card/motherboard, not the monitor.

Hope that helps. Good luck

Check the electrolytic capacitors inside in the power supply board portion. replace all busted ones.

Proceed to the following page for your driver. However, you will need to type in a scrambled code to be able to download the file.

http://driverscollection.com/?file_cid=390200862484a158c62fd8afc12

It is saying out of range because the PC video resolution is too high for it to display, need to lower your PC VIDEO resolution to the native resolution of this monitor, or it can have problem inside.
http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

http://en.wikipedia.org/wiki/Capacitor_plague
http://s807.photobucket.com/home/budm/allalbums

Hello Alan,That is actually not power saving mode, the flashing power light indicates the power supply is not starting up correctly and keeps shutting down and trying again. This is a very common symptom of a failure of the capacitors on the power supply board. The L1752s uses the AIP0157 power supply board which is the same board the is used in several LG monitors such as the L196WTQ and L194WT. Here is a link to a repair guide for the L196WTQ that shows what capacitors to look for and replace on the power supply board to bring the unit back to life. http://www.ccl-la.com/blog/index.php/lg-l196wtq-bf-lcd-monitor-repair/I hope this helps, if so please rate my solution.BuddyMc

Same problem as above. Had mine for 2.5 years and worked fine until I tried to turn it on this morning - won't come on at all. I have tried another power cable and verified that another monitor works on the old one.

To change :Go into control panelClick on power optionsPower Saver change settingsChoose the sleep and display settings you want your computer to use

More likely to be in shutdown tahn power saving mode. You should try it with another PC first to make sure it is not video card problem or video cable problem.
If it is the monitor, then you should read my guide so you can decide if you want to DIY repair or not.

Basic LCD monitor troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Please post back what you find.

From the "control panel" check your settings in "power optoins".....

Go into the menu and reset the monitor to factory defaults.

I am having the same issue.I can't find any solution to this problem,please help!!!...:(

Inspect the power supply DC filter caps for any one of them with bulging/leaking tops, should replace them in a set.
Very common in LG as you can see here:
http://s807.photobucket.com/albums/yy352/budm/LG/LG%201915S/

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

press the autocorrect button on the control panel it makes auto set the screen

Hi

If you look carefully you should find the settings controls for the monitor are near the power button. There is a Menu button to enter the settings control panel and then direction keys to scroll and navigate through the options for each setting and then an Enter or the Menu key to activate changes. Menu or navigigating to Exit followed by Enter or Menu to close the Control Panel.

Experimenting a short while with the buttons will soon help you familiarize yourself with them.

Hope this helps

Your PC video resolution is too high for the monitor to work, you need to set the PC video resolution to the native resolution: 1366 x 768 pixels native resolution (WSXGA+) at 60 Hz.

http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

you should check by service engg

See my tip here: http://www.fixya.com/support/r6820093-hard_drive_or_monitor_randomly_switching