LG Flatron L1750S 17" LCD Monitor - Answered Questions & Fixed issues

After you have the menu displayed, go to Setup (which is the bottommost tab on the vertical panel to the left, represented by a toothed wheel) highlight the first line at the top using auto/set button, and change it using + or - until you find english displayed

Which IC is equivalent as-- TDA9340PS/N3/A/1923(NXP).

Unfortunately, I can't help you with this issue, because I don't understand it at all. My eldest daughter installed CCTV cameras at my home because she is afraid of me because I am supposedly already old. But then she also installed smoke detectors and water leaks, she is afraid that I may leave the water not turned off or the stove, so she installed them. And in the application from this Ajax company, I monitor the security of my home and, in principle, this application is clear to me, although I am not very friendly with technology.

Below is service manual for this. Hope it helps! LG Flatron L1750S Service Manual

Hi, the Power Saving Mode, turns the screen off to conserve energy. On the remote, press Menu, and scan to Power Saving Mode. You can change the amount of time, when the Screen turn-off, the TV shut-off etc. You can set the time to (5 min) to, (never, turn-off). This should help with your problem. Thanks paul7of9

Click on the search glass or the start icon and type update. It should show up under the search and you need to look for windows update. Click on it.

Well thats seems tricky does it not come on at all when you boot the computer. If the screen is working then it should work to display the Start up screen. If it does then keep pressing Delete until the BIOS comes up- then search the pages for power saving and slect to OFF

If possible, attach analog and DVI cable together from one single graphics card. Just to test your monitor is due to old age or component failure.

The manual is here... http://www.lg.com/us/support-product/lg-L1750S-SN

Swap monitor for one that works on your machine?
Should be someone you know who would be willing.

Is it new?
If new ask for a swap.

F2 to open bios?

Here is the link to LG's site for this product: http://www.lg.com/uk/support-product/lg-L1750S-BN#

restart computer and pressing f8youget advance menuselect enable vga mode (xp)orlow resulation mode (for 7 & 8)when you loged in chaing resolution to 800x600 or 1024x786restart

Possible is a dead pixel. my friend

click HERE to start your download Unzip it runand enjoy(Clicking the blue link above will automatically start the download)

are you getting a check signal cable message? any on screen instructions?

try the cable, if it works on another monitor, then sorry to say but your monitor is fried

http://www.youtube.com/watch?v=CFm1H4cX3eY

check whether ur cpu is working fine

plz open your screen ribbun & jack your ribbun is crash than change screen fault cliaer

The VGA connection should be fine; I have DVI and when I switched from analog, the difference was pretty minimal, to my eyes.

Is it just the fonts that are blurry, or everything? If fonts only, then this almost certainly suggests that running the ClearType tuner again would solve the problem. But this applies to all displays, so if one is good and the other is not, then this isn't it.

If everything is a little blurry, then this suggests one of two problems -- the first, you report trying, which is that the display adapter is set to a different resolution than the native resolution of the LCD monitor itself. Your display adapter should probably be able to drive 2 monitors (the built-in laptop monitor and the external monitor) at once. You should be able to set their resolutions separately.

Assuming Windows XP: Start > Control Panel > Display > Settings > at which point, you should see two monitors listed in a dropdown. Set them to their native resolutions there (using the slider bar, usually all the way to the right), and save.

If you do have the display resolutions set to their native resolutions for both monitors, then it's possible that your external monitor is messed up. A quick test would be to run the on-screen settings, usually from a button on the monitor itself. If what is displayed there is sharp and what is displayed from Windows is not, then this points to a problem with the display driver. If everything, even the on-screen display is blurry, then perhaps the monitor settings are messed up -- usually there's an option to restore to factory settings -- try that.

If that doesn't work, I'm probably out of ideas, unless you have further information.

Hello,That is a common symptom of a failure of the filter capacitors on the power supply board. When the filter capacitors go out the backlight can get power so there is light but the control board is not powered up so you get no picture. You can rebuild the board and bring the unit back to full working condition by replacing the defective parts. Here is a link to information showing what capacitors you will need to get to do the rebuild.www.ccl-la.com/catalog/product_info.php?products_id=246And here is a picture of what the AIP-0108 power supply board looks likeI hope this helps,BuddyMc