20 Most Recent Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor - Page 7 Questions & Answers

I would use either the component or S-VIDEO input, but not both. There is no HDMI connector on the Samsung unit.

Hold menu button for 5-6 sec.Enable od disable this funnction

it will work

Hello,Flashing display and no picture is a very common symptom of bad capacitors on the power supply board. If you can do a little soldering then you can repair the power supply board yourself. Here is a link to information showing what capacitors need to be replaced on the power supply board.http://www.ccl-la.com/catalog/product_info.php?products_id=215I hope this helps,BuddyMc

Hello, Typicaly the VGA (analog) very common on older monitors, White DVI (digital) comon 2008 (depending on cost), currenty top of hte line monitors may have a Display port and or HDMI. Hope this is usefull.J

you can compare the color code in other samsung monitor.

Hello,The Samsung 731N monitors use the ILPI-013 power supply board. The capacitors on this board can cause the issues you are having when they start to fail. Here is a link to some information about replacing the capacitors on the board and repairing the unit.http://www.ccl-la.com/catalog/product_info.php?cPath=21_33_76&products_id=165I hope this helps.

Are you sure its the monitor and not the computer or graphics card. Almost sounds like the computer has booted into some type of default mode or is at the DOS "command line prompt".Not quite sure what "cable" you are speaking of sound like your talking about the power cable and what would not have any effect if not getting video data.Are you sure that your Op System has come up?