Canon ZR60 Mini DV Digital Camcorder - Answered Questions & Fixed issues

Have you plugged the right cables into the correct sockets ?

by all rights we shouldve deleted all your questions as spam,you only need to ask once,put all the info into 1 question,not between 3 or 4 questions,do you know what the yellow pages are???,in there you will find all kinds of info about camera repair,thank you,anymore and they will all be deleted, Precision Camera Digital Camera Repair Video Camera Repair

Depending on the operating system - here is the link http://www.usa.canon.com/cusa/support/consumer/camcorders/minidv_camcorders/zr60#DriversAndSoftware

You may download the manual and more here.

This can be caused by several problems including a defective eject switch in the cameras internal circuitry, a bad motor or a faulty rotary mode switch and can usually be repaired fairly inexpensively. However, it's not really a user serviceable problem and should be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is a failure in the switch block which is part of the side cover. It will require disassembling the camera to repair. This can usually be done fairly inexpensively. However, it's not really a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair cost low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

If the tape has been used many times to record try a new tape.
Maybe the tape has been exposed to a magnetic source like a speaker that is not shielded.

Yes, these units in particular have a common problem with the CCD sensors. It is not exactly an inexpensive repair, and if you had to pay for it yourself, would probably exceed the value of the camera. Contact Canon support as they may replace the CCD for free or under a special warranty, since the problem was so pervasive. If Canon won't replace it for you, you probably need to look into a new camcorder.

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Tape mechanism problems can be quite complicated but they can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

The DC port will need to be replaced and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Tape mechanism problems can be quite complicated but they can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be diagnosed by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Go to menu, vcr set up , av dv out, push menu button and change!

This can be caused by several problems including the transmission gear in the tape mechanism not engaging properly or a defective clutch in the take-up spool and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is usually caused by a defective component in the tape detection circuitry and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Check the SD card, it should have a small slide switch on the side, it should be in the up position (unlock), up meaning towards the end with the gold contacts. If it is in the down position, the card can not be written to.

This can be caused by a few things including a bad audio head or failed electronic circuitry and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is usually caused by an oxidized or defective Audio/Video drum. Try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This blog explains about connecting with a FW cable:
http://discussions.apple.com/message.jspa?messageID=3784419
Hope this gets it working for you, and good luck.

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .