hello there:
On Magic Chef ranges, F1 usually indicated a defect in either the
keypad or the electronic control. If the error shows when the keypad is
disconnected from control, the problem is usually in the control. If
the error ceases with the keypad disconnected, the keypad is usually
the cause.
On some models the keypad and electronic control are 1 integral
part in which case the whole control assembly usually has to be
replaced to correct the problem.
: Until you can get this part replaced you can disconnect the ribbon cable from the board and the error should go away can
here is as picture of the part you will need
:
: disable the beeping? if this is happening
The buzzer circuit
may be able to be separated from the
rest of the control. If wired to it, the wire(s) may be able to be cut.
or removed
hope this is very helpful for you
Best regards Mike