20 Most Recent Magic Chef 31000 Gas Kitchen Range - Page 8 Questions & Answers


Hi,
Here is a tip that I wrote that will help you with that problem...

The ignitor for your burner has failed...
Yeah it sounds crazy, but read this..
http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

Magic Chef 31000... | Answered on Apr 28, 2010


number one is this a problem you have had for a while or is it slowley decresing is it just one element or all one thing you can do is to take a dipper pin or a needle stick it through the orifice what your trying to do is to clean out some of the debre that collects a that tip dont try to inlarge the opening just try to clean it out if that does not work there is a gas flo adjustment but call around and see if some one with knowlege can help u over the phone gas adjustments can be dangerious

Magic Chef 31000... | Answered on Apr 12, 2010


Bet you the thermostat is shot

Magic Chef 31000... | Answered on Apr 10, 2010


Your range has a small 3"x1"x1" metal box with a gas valve going into it placed right behind the broiler flame tube; this gas safety valve alows the gas to enter the "pilot" tube to be lit by an piezio electric ignitor: that is the clicking you hear when you try to operate the oven. this gas valve needs to be replaced as, it is not opening to feed gas to the ignitor. an appliance parts store will have the oven gas valve; it just screws into place. be sure to turn off the gas and, remove power to the range before you do any work on it.

Magic Chef 31000... | Answered on Apr 06, 2010


Hi,
Here is a tip that I wrote that will help you with that problem...

The ignitor for your burner has faied...

http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

heatman101

Magic Chef 31000... | Answered on Apr 05, 2010


all 6 of the orifices 4 on top and 2 in the oven 1 for bake and 1 for broil have to be changed get the correct orifices the propane orifice opening is smaller and the natural gas opening is larger replace all of those and you are ready

Magic Chef 31000... | Answered on Apr 03, 2010


igniter is weak,replace it

Magic Chef 31000... | Answered on Mar 28, 2010


To replace the igniter (flat style), first turn off power to oven, shut off gas valve to oven, gain access to the back of the range and remove the cover from the igniter connector. Take the oven door off by pulling it up off the hinges, remove the cover over the oven burner to gain access to the igniter. Remove the two screws and pull the igniter out, then reverse to install. The part number for the flat igniter is 12400035.

Magic Chef 31000... | Answered on Mar 22, 2010


This sounds like your ignitor is not quite reaching the proper amp draw. For a free video on testing this go to www.appliancehelponline.com/servicemanual.html

Magic Chef 31000... | Answered on Mar 21, 2010

Tip

Magic Chef Gas Ovens


If your Magic Chef gas oven doesn't light, most likely the oven igniter (rectangle style) is the problem. The igniter may glow and appear to be working, but doesn't get get hot enough to open the oven bake valve. I recommend replacing the igniter first.

on Mar 21, 2010 | Magic Chef 31000 Gas Kitchen Range


This oven and range work from two separate regulators and it sounds like the one for the oven has failed. Have it replaced and that should get you going again. Hope this helps. Good luck.

Magic Chef 31000... | Answered on Mar 15, 2010


Press cancel and bake buttons simultaneously for 3-5 seconds until C appears then use up/down buttons to change to Fahrenheit. Hope this helps!

Magic Chef 31000... | Answered on Mar 10, 2010


Just because the igniter glows, does not necessarily mean it is good. Igniters grow weak with age and occasionally need to be replaced. The following link explains a little theory has these igniters and how to replace one:

http://www.fixya.com/support/r3575727-replacing_an_oven_igniter_on_a_gas_range


Replacement parts (if required) can be purchased at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

Prices vary between these sites, so shop and compare. The first three sites listed also offer helpful exploded view diagrams to help you locate and properly identify the parts you need.

If you have any qiuestions please post back and let me know. I hope this helps you.

Magic Chef 31000... | Answered on Mar 02, 2010


Go to their website (Magic Chef) and there should be a conversion kit. Simple to do - you just change out a few parts. Good luck

Magic Chef 31000... | Answered on Feb 16, 2010


Hi on the burners there is a hole where the gas comes out of the burner to light off the pilot is this blocked or are the pilots blocked short pilot flame

Magic Chef 31000... | Answered on Feb 09, 2010


Hi touch pad or clock fault

Magic Chef 31000... | Answered on Feb 08, 2010


It sounds like you have a weak igniter. Just because the igniter is coming on and glowing doesnt mean its getting hot enough to open the gas valve. The way the igniter operates is as it heats up, the hotter it gets the more current is able to pass through it. It needs to be able to get hot enough to allow the proper current to reach the gas valve for the gas valve to open. This is the issue 99/100 times. In the 4 years i've been working for my company I have only replaced two gas valves and both times it was because the customer shorted it out themselves by trying to replace the igniter without unplugging the unit. My website is down to be able to cross-reference the part and get you pricing but the factory OEM number for the bake igniter is 7432P075-60.

The igniter will be mounted on your burner tube by 2 5/16 screws. Will have to remove the bottom panel of the oven to access it. You will need to remove the broiler drawer at the bottom to acces the harness for the igniter. Unclip the harness and pull the igniter out from the top. BE SURE TO UNPLUG THE UNIT FIRST as you could run the risk of shorting your gas valve.


Good luck with the repair. Let me know how it goes. _MJ_

Magic Chef 31000... | Answered on Feb 07, 2010


if it is gas i would check the either bake or broil ignitor as both cycle on and off to preheat oven,, if one is out u will experience the problem u are discribing. some replacement ignitors are sgr403 or a 12400035 u can get pics of these ignitors on repairclinic.com hope this helps..

Magic Chef 31000... | Answered on Feb 07, 2010


no you do not need oven on! if it is a freestanding pilot that passes gas as soon as supply is on it should light with a match, if it isnt you may have a clogged orifice on that pilot hood, you need to remove the pilot line at pilot hood and get orifice out it may be stuck in there and need some coaxing but it'll come out it may even stick to pilot line once you take it apart, just clean with a clean rag and replace, I would clean pilot hood at this time as well , wire brush or very small file to clean any rust in there, be carefull not to break hood of pilot body it is easy to do if your not gentle

Magic Chef 31000... | Answered on Feb 06, 2010


hello there:
On Magic Chef ranges, F1 usually indicated a defect in either the keypad or the electronic control. If the error shows when the keypad is disconnected from control, the problem is usually in the control. If the error ceases with the keypad disconnected, the keypad is usually the cause.
On some models the keypad and electronic control are 1 integral part in which case the whole control assembly usually has to be replaced to correct the problem.
: Until you can get this part replaced you can disconnect the ribbon cable from the board and the error should go away can
here is as picture of the part you will need c8db069.gif
:
: disable the beeping? if this is happening
The buzzer circuit may be able to be separated from the rest of the control. If wired to it, the wire(s) may be able to be cut. or removed
hope this is very helpful for you
Best regards Mike

Magic Chef 31000... | Answered on Jan 19, 2010

Not finding what you are looking for?
Magic Chef 31000 Gas Kitchen Range Logo

311 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3489 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magic Chef Kitchen Ranges

  • Magic Chef Kitchen Ranges

Most Popular Question

cannot find replace battery in chef

  • Kitchen Ranges
Loading...