20 Most Recent Magic Chef CGR3725 Gas Kitchen Range - Page 2 Questions & Answers

0helpful
1answer

I have an electric gas stove with 4 burners and

local hard ware store should supplie gas stove fittings but make sure main gas supplie is turned off before working on seek an call a pro do not atempt to do it your self unless u have experience.
5/5/2009 8:07:41 AM • Magic Chef... • Answered on May 05, 2009
0helpful
1answer

Magic chef gas oven will not turn on

F1 means, defective touch pad or control.
1/10/2009 5:57:18 AM • Magic Chef... • Answered on Jan 10, 2009
0helpful
1answer

Can't turn on Magic Chef oven

check the door latch it must be opened completely if not then it will display DOOR if it is open all the way then checkthe switch on the latch assby for proper operation
12/9/2008 8:39:51 PM • Magic Chef... • Answered on Dec 09, 2008
0helpful
1answer

Pilot light out/will not go above 350

Sounds like the thermostat controlling the gas valve in the oven is not working, I’m trying to find if the oven igniter is electric, but believe the igniter is electric. If it does light then not regulate the temp above 350 degrees, I am convinced the thermostat control is bad.

10/21/2008 3:42:54 AM • Magic Chef... • Answered on Oct 21, 2008
0helpful
1answer

Magic Chef gas range

please check and make sure the knobs are not stuck in pull on each of them the oven does not spark it has a glow bar but there are switches behind the knobs that maybe sticking check that first
8/6/2008 2:06:36 PM • Magic Chef... • Answered on Aug 06, 2008
0helpful
1answer

Magic Chef Gas Oven - Heats up slowly and has intermittent gas smell

STOP USING THE OVEN IMMEDIATELY!!! You are not getting enough air to the burners to burn all the fuel. Not only will you have an explosion hazard, you'll have a carbon monoxide hazard either of which will KILL YOU. Read all of the info below before you begin.

You need to clean all the burners and inlets thoroughly. You probably used the oven for a lot of broiling of meats or it is quite old. The deposits are clogging the tubes which gauge the amount of air entering the burners or the burner holes themselves. The burner tubes are generally removable by removing one screw and giggling the units clear. Before taking anything apart, note carefully the positions of any mix plates and scribe small marks between the two surfaces. Use a heavy duty cleaner or WD-40 to loosen grime. Don't use abrasives like Comet. Then wash in mild detergent with hot water and dry. Be sure all burner openings are clear. After assembly, note the color of the flames. They should be about 90% blue along their length from the burner head. If they are not, you didn't finish the job cleanly or you have another problem. If the burners are old, rusty or have irregularly shaped flame holes, replace them.
12/23/2007 4:28:42 AM • Magic Chef... • Answered on Dec 23, 2007
0helpful
1answer

Lighting pilot light on Magic Chef oven: CGS3760ADC

since it is piotless how did you light burner pilots? The oven is piotless and does not have a free standing pilot. here is a link to manual copy and paste page 18 deals with oven. piotless
1/9/2024 1:25:48 AM • Magic Chef... • Answered on Jan 09, 2024
0helpful
1answer
0helpful
1answer
0helpful
1answer

Where does the power come from on my gas magic chef oven

If you click on your name it takes you to posting history. Or you can click upper right and click 'My Home'. It was answered. https://www.fixya.com/users/james-dean-88131 ..
11/7/2022 6:03:08 PM • Magic Chef... • Answered on Nov 07, 2022
0helpful
1answer

I have a Magic Chef oven that won't get to temperature?

Question edited for clarity and create a few sentences. A gas certified technician needs to fit a new thermostat. They can source the part, fit it and check for safety.
11/6/2022 2:27:00 AM • Magic Chef... • Answered on Nov 06, 2022
0helpful
2answers

I'm looking for a manual for Magic Chef gas range 8114P732-60. I want to know how to use the self clean feature.

This number - 8114P734-60 - is a part number (possibly for the tag it is on). It is not a model. Note: the part number does is not listed in any current parts lookups. Could be a non functioning number or too old to be listed.
2/27/2021 11:19:23 PM • Magic Chef... • Answered on Feb 27, 2021
0helpful
2answers

Changing a magic chef mod# 30011 PAW. From Lp to Ng

get orfices from your gas providers
1/12/2021 5:07:54 AM • Magic Chef... • Answered on Jan 12, 2021
0helpful
2answers

How do I turn off the pilot light in my Magic Chef 31000paw oven? I think when it stays on it is wasting gas.

I don't know. While half a century ago it was common that pilot lights would be permanently lit to provide instant lighting of oven and hobs, because they did consume a significant amount of gas they fell out of favour and spark ignition became reliable. Amid a number of related and unrelated accidents the gas oven began to be seen as potentially dangerous and so they were fitted with a couple of safety devices so for a considerable time the pilot light has to be relit every time the oven is used and the pilot light will be switched off when the oven burners are turned off. Thinking back a long time, the pilots of our old cooker could be turned off using a screwdriver to turn a central service valve hidden under the hob spill tray.
6/27/2020 12:41:46 AM • Magic Chef... • Answered on Jun 27, 2020
0helpful
1answer

I have a magic chef rev range and I am looking for 3 burner inserts #7214po15-60 or something to replace it . It seems to be no longer available

try manufacturer possible replacement number --appliance repair shop -online search
6/11/2019 3:06:53 PM • Magic Chef... • Answered on Jun 11, 2019
0helpful
1answer

I need a conversion kit # to change from natural gas to propane for a magic chef mdl31213wav

Sorry we do not have that kind of information, your local LP gas supplier can get what you need call them.
6/19/2018 8:35:32 PM • Magic Chef... • Answered on Jun 19, 2018
0helpful
1answer

Electric spark will not work, burners will not light

The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it. I’m happy to assist further over the phone at https://www.6ya.com/expert/latoya_8ed1bf3dc615c15d
3/25/2018 5:01:51 PM • Magic Chef... • Answered on Mar 25, 2018
Not finding what you are looking for?
Magic Chef CGR3725 Gas Kitchen Range Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3807 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magic Chef Kitchen Ranges

  • Magic Chef Kitchen Ranges

Most Popular Question

get f8 meswsage when try use oven

  • Kitchen Ranges
Loading...