John Deere J3816 Chaninsaw Switch - Answered Questions & Fixed issues


Some just connect externally to a barb fitting, but usually the fuel line and filter are all one piece. They are a bear to remove and replace because most of the new saws have a built in grommet in the fuel line itself to seal the plastic tank hole as it passes through it. Yours may have broken off inside the tank at the grommet. If so, its time for a new line/filter.

John Deere J3816... | Answered on Apr 21, 2015 | 157 views


https://www.bobcatmanualonline.com/downloads/john-deere-chainsaws-cs36-cs40-cs46-cs52-cs56-cs62-cs71-cs81-service-repair-manual

https://www.green-parts-direct.com/john-deere-parts-diagrams/john-deere-cs36-cs36le-cs40-cs40le-cs46-cs52-cs56-cs62-cs71-cs81-chain-saws-pc2847-carburetor-air-filter-cs46/AD-4275-34517-432112

John Deere... | Answered on Jan 16, 2020 | 31 views


Black smoke means iots getting too much fuel. This would cause lack of power as well. Check your choke as well as your carburetor.

John Deere... | Answered on Jan 12, 2020 | 24 views


http://www.reliancepowerparts.com/catalog/documents/tech-tips/torque-and-rebuild-specs/tr-jd-6068-PT-TSI.pdf

John Deere... | Answered on Jan 11, 2020 | 19 views


Multiple fuel filters. One inside tank and an external. Check fuel flow and volume (pressure) at the injectors.

John Deere... | Answered on Dec 31, 2019 | 21 views


If its an over head cam engine then yes you would have to do the valve timing, if its a push rod engine then no you do not.

John Deere... | Answered on Dec 24, 2019 | 19 views


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

John Deere... | Answered on Dec 22, 2019 | 214 views


1945: 542700
1946: 555334

Tractordata.com

Shows year of mfg as 1945.

John Deere... | Answered on Dec 02, 2019 | 22 views


The oil inside for the reverser is good? You found that the oil level was correct, the fluid was clean and no further actions were needed? Usually the failure is the clutch pack but that is seen in the fluid. Can you feel or notice that the shift lever is moving into the gear selection correctly? Do you notice, feel or hear that reverse gear is engaged when selected. Do you hear any noises or sounds that weren't there before the failure? Did this failure happen out of the blue or have you noticed reverse acting up for a while now? Please let me know. Good luck.

John Deere... | Answered on Dec 02, 2019 | 37 views


Order the service manual from John Deere.

John Deere... | Answered on Nov 30, 2019 | 65 views


Request the diagram from John Deere.

John Deere... | Answered on Nov 30, 2019 | 91 views


John Deere could be a source.

John Deere... | Answered on Nov 30, 2019 | 44 views


Request a starter wiring diagram from John Deere.

John Deere... | Answered on Nov 30, 2019 | 54 views


Request the diagram from John Deere.

John Deere... | Answered on Nov 30, 2019 | 35 views


Request the wiring diagram (not a schematic) directly from John Deere.

John Deere... | Answered on Nov 30, 2019 | 23 views


There are video's of how to do this on u tube .

John Deere... | Answered on Nov 28, 2019 | 37 views

Not finding what you are looking for?
John Deere J3816 Chaninsaw Switch Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top John Deere Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

346 Answers

john h

Level 3 Expert

22486 Answers

rjivaro

Level 2 Expert

158 Answers

Are you a John Deere Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...