20 Most Recent John Deere J3816 Chaninsaw Switch - Page 9 Questions & Answers


There are 3 adjustments, position, sensitivity, and rate or drop.

http://manuals.deere.com/omview/OMPY0146_19/?tM=HO
Rate-of-drop knob is also called implement lock. When knob is fully screw in, implement will not lower down even if position control lever is fully down. Use implement lock while transporting implement.

John Deere... | Answered on May 30, 2019


I have a lx277 john deere mower it move good forward reverse move real slow can you help me

John Deere... | Answered on May 29, 2019


drive belt -worn loose popped off or damaged ---forward / reverse linkage damaged or disconnected --transport lever engaged --wheel keyway missing ---trans axle pulley damaged --trans axle damaged

John Deere... | Answered on May 29, 2019


https://www.docssuite.org/manuals/?brand=John+Deere&utm_source=google&utm_medium=cpc&utm_term=john%20deere%20instruction%20manual&utm_network=g&utm_pos=1o2&utm_campaign=FindProductManuals_v2MB+11-26&gclid=EAIaIQobChMIs86foNi-4gIVFVYNCh0jjAiJEAMYAiAAEgJ7LvD_BwE can try this link or jd dealer the following is the basic specs From the orginal JD sales brochure:
166 bu grain tank
23.1-26 drive tires (std)
11.00-16 steer tires (std)
82 gal fuel tank Transport height 12' 8" (grain tank ext down)
Width 12' 4" (less harvesting unit)
Length 26' 1" (less harvesting unit, unload auger in rear position)
Weight 16,266 (base machine)

John Deere... | Answered on May 28, 2019


Thought what was for John Deere mowers?

John Deere... | Answered on May 28, 2019


Check the hydraulic oil is as proper level and the pump bypass is closed.

j1-2fmxd5rnylqp42uakpfjglld-3-0.png

John Deere... | Answered on May 27, 2019


http://manuals.deere.com/cceomview/OMM157225_A8/Output/Index.html?tM=HO

Make sure bypass is not engaged.
jd1-3dhniwsamby2vtfk3tuedt0y-2-2.png
Then check fluid level.

jd2-3dhniwsamby2vtfk3tuedt0y-2-5.png
If after adding fluid it still doesn't want to engage, raise back of unit so both wheels are off the ground and then move and hold steering arm and manually rotate wheel by hand, in both directions.

John Deere... | Answered on May 21, 2019


Check battery and charging system. Battery voltage should be >14 volts with engine running, >12.5 volts with engine off.

John Deere... | Answered on May 21, 2019


Either battery has failed or charging system has failed. Try charging battery with an automotive battery charger. If battery takes a charge then trouble is in tractor charging system... likely the voltage regulator.

John Deere... | Answered on May 19, 2019

Not finding what you are looking for?
John Deere J3816 Chaninsaw Switch Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top John Deere Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

346 Answers

john h

Level 3 Expert

22486 Answers

rjivaro

Level 2 Expert

158 Answers

Are you a John Deere Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

John Deere Garden

  • John Deere Garden

Most Popular Question

fuel line in tank come loose connect

  • Garden
Loading...