Top 20 HP Business InkJet 2800 Printer Questions & Answers

BECAUSE IT CANNOT FIND THE PROPER HARDWARE AND INK. TRY TO PRINT A TEST PAGE, AS WHEN YOU FIRST TEST IT.

Hi, To reverse an image for iron-on transfers 1. On the File menu in your software application, click Print. 2. Make sure the product is the selected printer. 3. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. 4. Click the Features tab. 5. In the Paper Type drop-down list, click More, and then select HP Iron-on Transfer from the list. 6. If the selected size is not what you want, click an appropriate size in the Size list. 7. Click the Advanced tab. 8. In the Features area, select the Mirror Image check box. 9. Click OK, and then click Print or OK in the Print dialog box. Read More.....HP Printer Support Thanks,

The chances are good that what U need to do is a printhead cleaning. On the printer if it has a LCD screen scroll through the menus and look for Maintenance or tools and then look for printhead cleaning . It can also be done through the software by going to the top left hand corner of the page U are trying to print and click on the button or File scroll down to print and click on that and that brings up a box with your printer name in it and beside that is a box called properties and look for maintenance or tools there. After the printhead cleaning it will ask if U want to print a test page - say yes if that page looks good -problem solved but it will probably take a few cleanings if U R getting blank pages now. Warning repeated cleanings use a lot of ink so only do what you need to. If after several cleanings U are still getting blank pages U might need to replace the printhead

Setup & Install for HP Business Inkjet 2800 Printer series: http://bit.ly/1h83Ey5

what weight of paper did you use. Normally 80grms or havier?

try looking under the printer properties in the software and check each section looking for a box that says print Mirror image and if the box is checked uncheck it

check the powercode/powerdadapter if its defective if not the printer powersupply is blownup you need to replace

That's unusual but was cartridge properly installed? did it give you any warning msgs? if u are going to install new cartridge, check if installation ok. Then using tool menu, clean and then alligne. Do a test print thru start - printer and dvise tab.

Go to the following websites for the manual:http://www8.hp.com/us/en/support-drivers.html?jumpid=ex_r11400_us/en//IPG/_ps_g_hpprinterservice/PrinterService&k_clickid=AMS'13'49712'4337041d-9473-c108-33b0-0000742c0cffor

h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&c...

1 SWITCH PROBLEM 2 MAIN PWB TO SWITCH WAYAER DICONCT

Where as I think you must re-install your printer's driver. Because sometime the driver of printer is blocked or not working well. Moreover, after re-installing the driver, you must update that driver.

There are no end of problems with HP printer driver software. I've had them too. The most likely success will come from completely UNINSTALLING the present HP printer software (ALL OF IT) and reinstalling the MOST CURRENT PRINTER DRIVER for your computer operating system. You download that driver from hp.com by inserting your model number an following the screen instructions. There is a companion PRINTER DOCTOR tool from HP that you should also download just in case you continue to have a problem after you install the new driver. I can't stress to much how important it is to completely remove all traces of the HP software from your computer first before you reinstall using the latest driver. Failure to do so will cause you continued problems. Also, if you want to minimize other software issues, after you've downloaded the most recent driver, REMOVE your Antivirus Program if you are using one. I found that there were conflicts caused by Kaspersky AV firewall settings that HP software did not over come. I reinstalled Kaspersky AV after the HP software install and everything worked fine then. The necessity of this step seems to be computer-dependent. I have 3 pcs, all running Win10 Home and only ONE of them required this extreme step in order to get the software to function completely ok.

Good morning,unfortunately we had the same problem in our workshop and we had to replace the motor as a brushless motor is worn and you have the reference here PartSurfer hp:http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=C8163AEduardowww.agtec.es

check and see if your cursor goes to the next page after your last written one in your document. If so then backspace to your last written page so that the blank page disappears because having this page the computer takes it as part of the document but because there is nothing on it a blank page comes out.

Hi

Did you check the connections in the carriage if there is little amount of ink on the contacts? if not then clean it well with a dump cloth and try to re-install the old printhead it will sure accept it. If not then the other way is to change system date of the printer first and then try again.

DO RATE MY SOLUTION

hello there, when you service the print heads you also check the ink levels. The phenomenom you are experiencing usually comes up when the ink has been refilled. Refilled inks usually do not circulate and flow well. Before checking the service station check the ink cartridges and ensure that they are devoid of ink clots on the face plate where they supply ink through. If they are not devoid of clots clean them and ensure the ink levels are ok. If this is okay then check the service stations flow of ink for clogs and flow of ink blockages.
Hope this support has been helpful?
Thank you for visiting FixYa.

Hi. download user manual for your hp printer. http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00449611/c00449611.pdf

Hi

My friend the cartridge which leaked earlier has spilled ink in side on the contacts of the printer where the smart chip comes in contact. Try to clean well with a tissue paper and try to insert slowly into the printer and this will solve the problem.

If not then carefully remove the smart chip from the old one and replace it with the new and install back in the printer.

Take care.

!-Try using the HP Print Diagnostic Utility in Windows