20 Most Recent HP PSC 2175 All-In-One InkJet Printer - Page 9 Questions & Answers

Yes you can go to http://www.hp.com click on download software help and support type your printer in the box and type in HP PSC 2175 then it will bring you to a list of operating software choose your software xp xp pro windows 7 or Mac then elect the software you want the print and scanner software on it or the complete software including the trouble shooting software. then download it and install it. On some HP models you have to have the printer disconnected from the computer before you install it then during the installation it will tell you to plug it in do so at this time. If you have an anti virus software running you may have to turn it off till you get it downloaded and installed. Be sure before you do this if you have the software already installed on it to remove it then do a disk clean up then DE-fragment the drive before installing, this will help from keeping your computer slowing down with to many fragmented files and having the files on the computer twice.

remove the cartidge from the printer and clean up the bronze dotted spots on the cartidge as well as the place where the cartidge is placed inside the printer... then turn on your printer it will ask you to insert the cartidges .....
hope it will owrk for you if does not you may try another cartidge if does not work either its time to call the Manufacturer and get the printer replaced....

Here you go:
http://h10032.www1.hp.com/ctg/Manual/bpu73527.pdf
Cheers!

USE HP 56 for Black and 57 for color.
Then follow the below steps.
STEP 1.
Please take out all the cartridges and clean the copper contacts with a lint free cloth and the distilled water.
STEP 2.
1. Un plug the power chord from the back of the printer.
2. Press and hold the power button of the printer.Wait for 30 seconds.
3. While holding the power button, re-plug the power cable.
4. Turn on the printer, if it is not on.

STEP 3.
Reset the All-in-One to the factory default settings by using these instructions:

1. Unplug the power cable from printer when the printer is powered on.

2. Press and hold Cancel and the Right Arrow while plugging in the power cord.

Continue holding until it displays S Full Reset message in the front panel of the All-in-One.

This will fix the issue.

Press and hold the Setup button, and then press Options (or Copy Options ).

It will bypass the alignment.

Replace all carts with new ones to turn the message off.

replace cartridges

replace your scanner assembly

Hola. Si el cartucho es nuevo, devuelvelo, es el cartucho que esta defectuoso.
Pero si es cartucho ha sido recargado lee las siguientes lineas:
Tienes que decirme si los cartuchos was refilled, porque en ese caso la impresora no los va a reconocer como llenos., la razon es porque los cartuchos tienen un "contador electronic" que solo analiza informacion de cuantas hojas se han impreso, y al momento de ser recargados solo les colocan tinta, y el contador sigue marcando vacio.
Si aun con este mensaje puedes seguir imprimiendo, no te preocupes, pero si no, por favor dejame saber el modelo de tus cartuchos como respuesta y te mostrare como resetear.

• Black - HP56
• Colour - HP57

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00259215&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&product=90809&os=228

• If this solutions solves you problem, please do not forget to rate my solution.
• If not, then please comment back so I can help some more

It might be the carrige unit that is stuck or the purge unit that cleans and caps the cartridges!If its a cheap printer i would suggest buying a new one!

Hi there

You need a program that you can use on your PC with this program you scan it to your PC and then print it out, ok you need a program like art or photo or paint or some thing like this that have a scan in it.

Read more below.
The best program to put on your Pc is what I use and it is Free you, it is called PagePluse SE, you should try it you can do all sort of things with it but there no scan on it, just scan your photos to the your pc with another program witch has scan on it and put them in the SE program and you can do any size you wont and after adding text to it or backgrounds you can send it to the printer and print, an other program I use for scanning from the printer to the PC is called PainShop Pro 7 witch is a old program there newer ones out now but I am happy just using the old one it does the trick.

The Free version is Called PagePluse SE you not need the version 9.

Ok here the link to download the PagePluse SE program and it not a free trial it a free, there is one you can Buy but this is all you need download the free one it just as good.

Click Link = http://www.freeserifsoftware.com/software/pageplus/index.asp

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Hi ,
Here is a link for the documet that will help you resolve the issue......
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01931887&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=90809
hope this helps you

from this link you will find the solution

http://search.hp.com/query.html?lang=en&search=++&qt=HP+PSC+2175+All-In-One+InkJet+Printer&la=en&cc=us&charset=utf-8

and here is the manual

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&product=90809&lc=en&jumpid=reg_R1002_USEN

power source directly to wall socket line.

check your cartridges

Try to manually close it by pushing it. Otherwise, it's is most likely time to replace it with a new one.

Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

It is the test page it is alignment test page just put the printed alignment test page paper on scanner glass and press the scan button to complete the process. It is alignment process which is printer is doing for self testing after installing new cartridge. Just finish the process.

Have a nice day and do not forget to rate please...!