20 Most Recent HP PSC 2175 All-In-One InkJet Printer - Page 2 Questions & Answers


The main problem here is that the printer is not a wireless printer.
But you can install the printer wirelessly through a wirelss printing upgrade kit, refer the link bellow:

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00867651&dlc=en&product=90809

Good Luck

HP PSC 2175... | Answered on Nov 14, 2013


Perform the following steps to align the ink cartridges:
  1. Disconnect the power cord from the unit, wait five seconds, and then plug it back in. This will reinitialize the unit.
  2. Print another alignment test page. If the Press Enter to align message is not currently on the front panel display, complete the following steps to print an alignment page:
    1. Press Setup or Menu on the front panel (depending on the model).
    2. Press the right arrow button (>) until Maintenance or Tools is displayed, and then press Enter or OK (depending on the model).
    3. Press the right arrow button (>) until Align Print Cartridges is displayed, and then press Enter or OK (depending on the model).
  3. To determine if the automatic alignment is functioning correctly, look into the output tray as the alignment page is printing; a blue light should be visible periodically on the page as the cartridges move back and forth. If this light is not visible, the product will not be able to align the cartridges and will require service. Service the product.
  4. If the blue light is visible and the alignment pages are printing correctly, but the alignment pages still fails, there still may be a hardware problem with the unit.
    • If there are no other printing problems and you wish to continue, use the information in the Bypassing the ink cartridge alignment section below to bypass the alignment. The information from last successful alignment will be used.
    • If the message keeps reappearing or other print quality problems occur, service the product.
Models with a semi-automatic print cartridge alignment Some HP products have a semi-automatic alignment process. These models do not have an additional sensor and will print two pages for the alignment process instead of one. The alignment page must be placed on the scanner glass or into the automatic document feeder (HP Officejet V series) and scanned.
  1. Disconnect the power cord, wait five seconds, and then plug it in. This reinitializes the product and forces the scanner to calibrate again.
  2. Examine the scanner glass and white scan backing. Clean the scanner glass and scan backing if they are not clean. To clean the scanner glass and scan backing, use a soft cloth towel slightly dampened with clean water.
  3. With the product turned on, open the scanner cover and check the bulb assembly. If the scanner bulb is not lit, the product must be serviced.
  4. Verify that the alignment page is placed correctly on the scanner glass or in the ADF (if the product has one). Place the printed side down.
  5. 5. Make a copy of the alignment page. The unit will make a copy even if the alignment message is displayed. Compare the copy to the original. If vertical lines appear in the copy, check to see if the scanner assembly requires cleaning. If cleaning the scanner assembly does not correct the problem, service the product.
  6. 6. Use the information in the Bypassing the ink cartridge alignment section below to bypass the alignment. Operate the HP All-in-One to determine if there are other problems. The unit should be serviced if other error messages or problems occur or if alignment problems occur every time the ink cartridges are changed.
To bypass the ink cartridge alignment: Press and hold the Setup button, and then press Options (or Copy Options ).

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

HP PSC 2175... | Answered on Feb 20, 2013


Hi Yvonne,

Try the steps below

Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.

(If you are using Windows Vista/Win 7, You need to click on START button and under search program and files - Enter the Services.msc and click the same program from Program list that appear )

In the window that opens (Services) look for "Print Spooler" on the right

Right-click "Print Spooler" and select "Properties".

Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".

Make sure the 2 text boxes underneath say "1" in them.

Click Ok until you are back at the Services window, close it and you're good to go.

Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.

The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic



Regards,
Sean

HP PSC 2175... | Answered on Feb 16, 2013


Hi Brendi,
Are you looking for Software and Drivers for your HP PSC 2175 for New Windows 7 PC ?

If so, you don't need to look for drivers because the drivers are in-built in your PC database.
All you need to do is connect your printer using USB Cable to your PC and Start printing.
You will have to use MS Paint for Scanning any document or use the Scanners and Camera's Option under Control Panel ( START - All Programs - Control Panel )
Regards,Sean

HP PSC 2175... | Answered on Sep 17, 2012


open the back cover and re insert it.

HP PSC 2175... | Answered on Aug 30, 2012


ALL cartridges must have ink to complete the alignment.

HP PSC 2175... | Answered on Jul 23, 2012


Hi,
Select the OS that you want to install HP PSC2175. Download from here.
Hope this helps, please rate and let me know if any assistance needed, thank you for visiting fixya.com.

HP PSC 2175... | Answered on Sep 03, 2011


For Windows XP and such...
Uses this link...

XP Drivers

For Vista and Windows 7 there are no downloadable drivers. Follow this link for instructions to install via Windows Updates.

Windows Updates Install

HP PSC 2175... | Answered on Aug 24, 2011


clean decode strip and cartridge contacts

HP PSC 2175... | Answered on Aug 09, 2011


Follow the instructions here https://www.fixya.com/support/t9851508-printer_hp_psc to get access to the glass and mirror. Use a lint free cloth. After reassembly, it still may not work. Just clean it again. It has to be very very clean.

HP PSC 2175... | Answered on Aug 04, 2011


Software & Driver Downloads - HP PSC 2175 All-in-One Printer @ http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=90809

Select your OS to download & install correct version for your system.

Hope it helps.

HP PSC 2175... | Answered on Jul 26, 2011

Not finding what you are looking for?
HP PSC 2175 All-In-One InkJet Printer Logo

640 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

getting red work

  • Office Equipment & Supplies
Loading...