HP LaserJet 3015 All-In-One Printer - Answered Questions & Fixed issues

Yes it matters some times, try a word file of 20 pages or more

Clear Error 79 on HP Laserjet 3015

59.60 is a main motor error. You will need a repair center or a tech to take care of your problem

the tires are most likely worn out. to give you more time clean with alcohol. but will need replacing

Just Google 3015 picks up multiple papers I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

2SC44527, 2SC4520 or 2SC4521 can be used http://electronicshelponline.blogspot.com/

Hi there, Lisa here. I would be happy to help you with your LaserJet 3015. I see you are getting a reset error 57.03. Please take a look at the following link, locate your error, and complete the recommended solutions: HP LaserJet Error Codes 50 59 I hope this helps. I work on behalf of HP.

File name: upd-5_1_1_8232-pcl5_winxp-vista-x64.exe [1/1, 15.21M] System requirements: Client and server operated systems supported for the most current release of the UPD:
Client operating systems supported:

• Microsoft Windows 7 Starter, Home Premium, Professional, Enterprise, and Ultimate; x86 and x64
• Microsoft Windows Vista Business, Enterprise, Home Basic, Home Premium, and Ultimate; x86 and x64
• Microsoft Windows XP (SP2 and later) Home Edition, and Professional; x86 and x64
  *Note: Microsoft retired mainstream support for Windows XP in April 2009. HP will continue to provide best effort support for the current UPD and tools for the discontinued Windows XP operating system until 2011

Check the cable. If possible try a new cable in between printer and computer for more details check the link bellow http://electro-medical.blogspot.com/

From HP: "The remote user pressed the Stop key, causing the session to be terminated." Meaning the problem is at the location of the fax you are sending TO. Call them, and ask them to confirm that their fax device is ready and able to receive. http://support.hp.com/us-en/document/buu02549

replace print engine laser/scanner assy

clean cassette & doctor blade thoroughly

Replace the fuser

sources: HP LaserJet 3015 Printer Drivers Download For Windows 8 1 7 XP see usually its due to queue memory is exceeded by it limit by clearing the queue and system temp files its will be cleared....otherwise if the issues not solved then go with the re-installation of drivers will increase the memory size for page print with the latest drivers.

Have you tried the HP LaserJet 3015/3020/3030/3380 Fix Scan Utility v3.1

Information about the Fix Scan Utility 3.1
http://www.opendrivers.com/driver/233507/hp-laserjet-3015-3020-3030-3380-fix-scan-utility-v3.1-windows-98se-me-2000-xp-server-2003-free-download.html

Download from HP
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ma-38336-1


Download the latest Driver and Software
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378050&lang=en&cc=us&prodTypeId=18972&prodSeriesId=378048&taskId=135


HP Business Support Center
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=18972&prodSeriesId=378048


User Guide
http://www.lavc.edu/IT/Manuals/Printer_HP_Laserjet_3015_User_Guide.pdf

I hope this helps!
Steve

51 error is a laser/scanner error. You are going to need a tech to replace it. Sorry

Print a couple of pages. As the printer is printing open the toner cover. Pull the toner cartridge out and look down at the paper. If the printing looks good the fuser probably needs replacing. Before doing that, have you checked the toner cartridge.

According to some information I found in some other forums, the best responses and fix methods all contained these steps -- Quoting various sources--- The 49.xxxx errors are "communication errors" and can be caused by many things:Corrupted driver, corrupted firmware, corrupted print job, bad nic card (your printer has a built in network port), bad memory DIMM, bad formatter board etc etc. Unplug the network cable, power off and then back on..........print a configuration page...........check that the printer sees the network port (if you see the IP address on the EIO page it sees it)...........if it doesn't see it you may have a bad formatter board (the network port is built in it). If the printer works just fine while unplugged from the network, start replacing the network cable, otherwise you need to look into your network (end quotes). Best of luck in resolving, please update this message if it did solve it. --- -----

straight paper path. take out tray and toner pop down back the paper will be in one of the places.. check for nicks or damage to leading edge of the paper. If its labels get back to us.

You clean the memory by deleting all the print jobs awaiting for printing.